YIHUA 899D+ SMD rework station,Imported high-power heater
*MAIN FUNCTION
1. High-quality resistance good for long service life , low noise.
2. Microcomputer control , warms up quickly , and so does cooling.
3. Handle with sensor switch, the system will turn into the working mode while the handle is held; and the system will standby while the handle is put on the holder, which is very convenient and Energy Save.
4. Suitable for SOIC , CHIP , QFP ,PLCC , BGA , Heating Shrink , Drying , Lacquer Removal , Ice-Out , Pre - Heating and other temperature - sensitive components .
5. Closed circuit Sensor , microcomputer zero-crossing soft touch temperature control, LED visual display , high power , rapid rise of temperature , accurate and stable temperature , little influence of air outflow , and unsoldering without lead.
6. Be able to operate individually, work independence;LED digital display accurancy 1 °C.
7. Wind volume and temperature are adjustable , suitable for many kinds of use .
8. Using sillica gel line good for long use.
9. This product is ESD-protected and CE approved
10. Shell using alloy material, elegant appearance; Intelligent detection and cool airflow features.
The power of soldering iron station is 75W
NEW Features (Energy Saving and Convenient ):
Manual / Auto Switchable for Rework Operation:
[Hot air gun]
1. Put the key to auto :
When you put the hot air gun on the holder, the hot air gun will cooling to 100°C and automatic shut down .
Next time, when you take up the hot air gun, it will automatic heating up to the original temperature you have been set .
2. Put the key to manual :
When you put the hot air gun on the holder, the hot air gun still work along.
[Soldering iron]
The blue key would set up : 2/5/10/20 minutes
1.If you set up 2 minutes , when you put the soldering iron on the holder after 2 minutes that the soldering iron will enter the standby mode (200°C).
Next time , when you take up the soldering iron , it will automatic heating up to the original temperature you have been set .
2. If you not set up the minute that the soldering iron will keep the temperature along with your using.
·Blue /RED digital LED displays for Both rework and soldering station.
·The air flow and temperature with control keypad.
YIHUA 899D+ SMD rework station,Imported high-power heater
Technical Data:
Power consumption: 720W
Gun Temperature range: 100-450°C
Gun heater material: Ferro-alloys
Gun heater resistance: 74Ω
Gun type: Brushless Fan air flow: 120L/min
Soldering Iron Temperature range: 200-450°C
soldering Iron Type: Blue Handle
Soldering Iron Heater material: Imported high-power heater
Soldering Iron heater resistance: 3.5~4.1Ω
Gross weight: 3.15KG/pcs
Inner box Dimension(cm): 26*16.5*14.8
Outer box Dimension(cm): 57.5*36*32
