1,Special Features
l With Twin-star bus 10Gigabitcore switch backplane, support non-blocking wire-speed switch, support 1.25GEPON optical fiber access.
l 2.5U height, adopt fullfront-wiring, small size, high capacity, maximum EPON optical fiber interfacesreach up to 16.
l Provide single main controlmodule, single uplink module, single power supply module and 4 serviceinterface modules.
l Support AC/DC dual powersupply, with backup power charger and alarm device, support connecting externalstorage battery directly to do backup power charging protection.
l Support flexible controllablemulti-cast, IGMP Proxy/Snooping and etc.
l Support strong VLAN extensionfunctions, including VLAN Stacking/Trunk/Translation, etc.
l Support flexible DBA,uplink/downlink service rate-limited, precision up to 0.2% (Standardrequirement<5%)
l Adopt multi LLID andIEEE802.1p technologies, provide multi protection QoS service
2,EquipmentComponents
No | Item | Full load Qty | Description |
1 | Equipment frame | 1 | OLT equipment frame, including 10Gigabit core switch backplane |
2 | Main control module (SWA) | 1 | Hot-swappable module, integrate 1 FE out of band management port, 1 debugging serial port, 10Gigabit class non-blocking switch) |
3 | EPON interface module (EP4) | 4 | Hot-swappable 4 EPON interfaces modules, compliant with IEEE802.3-2005 EPON technical standard, support 20km transmission distance (Standard configuration without optical module) |
4 | Uplink interface module(HUP) | 1 | Hot-swappable 4 GE interfaces module, SFP slot, support 4GE+10GE XFP(Standard configuration without optical module) |
5 | Fans module(FAN16) | 1 | Hot-swappable fans module |
6 | Power module(PWR) | 1 | Hot-swappable power supply module supports 220VAC/48VDC (With UPS charger). Builds dual power redundant hot backup with dual power supply |
3,Hardware features
Equipment parameters | Dimension | 486mm(W)*103mm(H)*384mm(D) |
Net weight | 5Kg | |
Power consumption | ≤40W | |
Operating condition | Temperature:0 ~ +55℃, humidity:10 ~ 90% (non-condensed) | |
Storing condition | Temperature:-25 ~ +70℃, humidity:10 ~ 90% (non-condensed) | |
Power supply | DC | 36 ~ 75 VDC |
AC | 176 ~ 264 VAC | |
Equipment interface | Uplink Ethernet interface | 1*10GE(XFP connector), 4*GE interfaces (GE or SFP connectors) |
EPON interface | 16*EPON SFP interfaces | |
Console debugging interface | 1 interface, compliant with RS232 technical standard | |
Out-of-band management interface | 1 interface, compliant with 100Base-TX technical standard | |
Monitor and alarm interface | 1 interface, compliant with RS485 technical standard (Support sub-node monitor ) |
4,Advanced features
Switch function | 10Gigabit switch backplane (Switch capability reach up to 60Gbps), non-blocking wire-speed switch ability |
VLAN | Support IEEE 802.1Q VLAN, support 4K concurrent VLAN |
RSTP | Support STP, RSTP |
IGMP | Support IGMPv1/v2 protocol, support IGMP Snooping/Proxy, support controllable multicast |
QoS and ACL | Support CAR(Committed Access Rate), flow rate limit granularity is 64Kbps, |
Broadcast storm suppression | Support broadcast, multicast and DLF broadcast storm suppression, suppression based on setting PPS |
Flow control | Support IEEE 802.3x flow control in Full duplex mode, support backpressure flow control in half duplex mode |
Encryption and security | Support LLID MAC address bundling, control the registration of ONU. Prevent illegal ONU deceive |
Link test | Support EPON network link diagnosis by Ping and Link test |
Configuration recovery | Support ONU off line configuration, auto-configuration when registered |
Management | FTP, Telnet, Console |
Management function | Support equipment configuration management, performance management, fault management, sources management, safety management and etc. |
Redundant backup | Support AC/DC dual power protection |
