Single Side Adjustment C Beams forming machine
Description:
- Machine structure:Torri stands structure,chrome coating on the stands
- Main forming machine power:11KW Siemens motor made in China
- Main forming stands tower:23 stations plus7 rollers are for leveling
- Diameter of shaft:60mm
- Thickness of formed steel:1.0--1.6mm,G350Mpa cold rolled steel
- Material of the roller: GCr15.quenched HRC58-62 ,chromed 0.05mm
- Material of shaft:45# fine processment
- Way of drive :chain drive
- Way of cutting:flying shear ,AC servo-motor,Yaskawa made in Japan (without stopping the machine to cut)
- Length cutting tolerance:+/-1mm
- Hydraulic station power:5.5KW ram type pump
- Way of control:we adopt PLC, Siemens PLC made in Japan
- Yaskawa speed inverter made in Japan
- Omron encoder made in Japan
- Power supply requirements:380V 50Hz 3Ph or 440V 60Hz 3Ph
- To change the different width by moving one side of the machine frame
- 16:Beams combination machine 1 set
- Beam combination machine motor:5.5kw
- Combination station:6station
- Way of drive:chain drive
- Combination demension:4000mmx1000mmx1000mm
manual decoiler:
- Capacity: 3 tons
- Inner diameter: 450--550mm
- Outer diameter: max1000mm
Equipment components:
include:3 tons manual decoiler, feeding& leveling unit, ,roll forming machine, hydraulic flying shear unit, PLC cabinet, output table(4) .4 sets of cutting blades ,beams combination machine 1 set
Applications:
Beams
Specifications:
Profiles Drawing:
Flow chart
manual decoiler -- feeding&leveling ---- sheet forming -- hydraulic shearing - outables -- beams combination machine
Beams combination machine:
- Main specification
NO. |
Items |
Unit |
Main specification |
1 |
Material thickness |
mm |
1.5-2,5 |
2 |
Forming speed |
m/min |
12-20 |
3 |
Roll station |
/ |
|