A182F11 Inverted Bucket Steam Trap Vertical Installation ER415 ER416
Quick Details:
Specifications:
Double ported differential pressure mechanism
Water Seal for No Steam Loss
With Air vent on the bucket top
High back pressure
Design Pressure: PN100
Pressure: 0.05 - 6.9 Mpa
Inverted Bucket Steam Trap / Mechanical Steam Trap / Bucket Steam Trap
ER415, ER416:
- 1. With main valve and sub-valve double ported differential pressure mechanism and SCCV system, the trap is small in size and large in capacity.
- 2. Effective preventing leakage because of the water seal inside valve.
- 3. Open float withstands water hammer. Air vent on the bucket top can effectively prevent steam locking and air locking.
- 4. Back pressure rate up to 90%.
- 5. Vertical installation. Internal check valve has light influence on capacity.
Application:
This steam trap is suitable for medium pressure heating equipment which produce a large amount of condensate and over-heated steam.
Instruction:
The length of condensate receiving pipe is 700-1000mm, making the location of trap lower than the main steam pipe line. Insulation is not recommended for the steam trap and receiving pipe. In case of superheat steam, do not oversize the ostiole to prevent evaporation of the condensate.