Easy to use/maintain:
1. Completely automatic operation
2. Simple design
3. Very low maintenance
4. Self monitoring
5. Self priming
6. Continuous performance reporting
7. Heavy duty industrial marine coating
8. Factory installed bronze piping & valves
9. On board flow indication
Flexible:
1. Ship mounted or offshore platform
2. Customizable size & controls
3. Site specific optimization
4. Various power voltages
5. Remote monitoring optional
6. Stable platform not required
Highly efficient:
1. Maximum coalescence
2. Laminar flow
3. Surpasses international
4. Maritime discharge limits
5. Minimal power requirements
6. Small compact size
Model | 2T/107 | 5T/107 | 11T/107 | 25T/107 | 45T/107 |
Capacity gpm(M3/hr) | 2.2(0.5) | 5(1.0) | 10(2.5) | 25(5.0) | 45(10.0) |
BOSS Oily Water Separators-Specification sheet 107(49)
Specifications | 2 GPM | 5 GPM | 10 GPM | 25 GPM | 45 GPM |
Height(inch/cm) | 48(122) | 56(142) | 72(183) | 74(188) | 20(203) |
Width(inch/cm) | 26(66) | 28(71) | 36(91) | 40(102) | 54(137) |
Depth(inch/cm) | 42(107) | 46(117) | 60(152) | 78(198) | 96(244) |
Dry Weight(lbs./lilogram) | 700(318) | 850(386) | 1500(680) | 2500(1135) | 4000(1816) |
Capacity gpm(m3/hr) | 2(0.45) | 5(1.13) | 10(2.27) | 25(5.68) | 45(10.22) |
Activated Carbon Media Chaege(lbs./kg) | 60(27) | 110(50) | 250(114) | 500(227) | 1000(454) |
Organoclay/Sand charge(lbs./kg) | 92(42) | 185(84) | 365(166) | 730(331) | 1500(662) |
Pipe connections(In/Out) | 3/4''-3/4'' | 1''-3/4'' | 1 1/2''-3/4'' | 1 1/2''-1 1/2'' | 2''-1 1/2'' |
ALL UNITS (Oily Water Separators)
Specifications | Value |
IMO MEPC Compliance | 107(49) |
Test PSIG | 45 |
Operating Pressure | 15 PSIG |
Operating Temp Range | 5-60 C |
Max Free Oil Concentration | 35% |
Max Fluid "C" Concentration(with Filter) | 6% |
Oil in Water Discharge with TPH | <15ppm |
Single Phase Power Options | 110/120vac 220vac |
Three Phase Power Options | 210/220 380/415 460/480 575/600 vac |
DC Power Options | 12 or 24 |
Frequency | 50 or 60 Hz |
Max Amperage | <15 amps |
Max Turbidity for Accurate TPH Reading | 35 NTU |
Design Negative Inlet Head(Ft/M) | 9(2.8) |
Positive Inlet Head Design Pressure(Motorizde Vale Required) | 15 PSIG |
Level Sensor | Conductance |
Pump | Centrifugal w SS Housing |
Coalescing Media | Polypropylense/HDPE |
Hazardous Area Classification | Nema 4X or Class I Div II |
Coating Specification | Epoxy/Uret hane |
Piping and Manual Vales | Bronze/Red Brass |
Vessel Metallurgy | Marine Coated Carbon Steel |
