Model | Drive Mode | Platform Net Size (L*W) | Installation Position |
BMWR-201 | Manual | 1910 × 810 mm | Installed at the side or rear door of vehicle, such as van, minivan, truck and so on. |
BMWR-202 | Manual | 2310 × 810 mm |
OPERATION:
a. This ramp is locked by two buckles which are at the two sides of ramp. When needed, the operator should unlock the two buckles first.
b. After the buckles are unlocked, hold the handrail (refer to Figure 3) and pull the ramp forward, so that the two pieces of ramps will form a slop which can help wheelchair get into/out of vehicle.
c. After the wheelchair get into/out of vehicle, fold the two pieces of ramps, and then lock the two buckles. This is the end of the operation
ADVANTAGES
This ramp is operated manually which is safety.
There are two gas springs at the two sides of ramp, which make the operation easy.
There is a setscrew at the bottom of ramp which can ensure the ramp vertical under the condition of being stowed. Also the setscrew can avoid ramp unfolding by itself. This is one of the safe equipments.
TECHNICAL SPERCIFICATIONS
Model | Platform Net Size (A×B) | Overall width (C) | Overall height (D) | Overall Length (E) | Loading capacity | Own weight |
BMWR-201 | 1910×810 | 880 mm | 1050 mm | 265 mm | 350 Kg | 40 Kg |
BMWR-202 | 2310×810 | 880 mm | 1250 mm | 265 mm | 350 Kg | 40 Kg |
