.jpg)
Stainless Steel Metric Ball Bearings
Deep groove ball bearings
Deep groove ball bearings
1)The single row deep groove ball bearing are simple in design, non-separable, suitable for high and even very high speeds and are robust in operation, requiring little maintenance.
2) Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads, even at high speeds.
3) Deep-groove bearings have higher load ratings for their size than shallow-groove , but are also less tolerant of misalignment of the inner and outer races.
4) A misaligned shallow-groove bearing may support a larger load than the same sized deep-groove bearing with similar misalignment.
5) This kind of bearing is also available both in open design and sealed design.
6)special processing on surface or with rubber covers to proofing water,proofing dust and with good sealing.
6)special processing on surface or with rubber covers to proofing water,proofing dust and with good sealing.
7)special processing on surface or with iron covers to proofing dust and with good sealing.
8)This kind of bearings can be made of plastic, ceramics, bearing steel, stainless steel.
Limiting speeds(rpm): Grease—34000; Oil—40000;
Material: refined bearing steel GCr15[SAE52100] or stainless steel 9Cr18[AIS1440C],
Vibration and Noise standard: V4Z5,V3Z4
Stainless Steel Metric Ball Bearings
.jpg)
.jpg)
