Eco Friendly Synthetic Mosaic Tile Adhesive Super Stone For Kitchen
|
Product Name |
PB-303 Flexible Stone Glue (C2) |
|
Appearance |
White, gray power |
|
Application |
Pasting the tile adhesive,stone and mosaic on on all sorts of wall, ground,floor |
|
Surface Preparation |
Firm, dry and clean, no grease, no wax, etc |
|
Feature |
Environment-friendly,easily applied, excellent cohesion force,high thixotropy,long open assembly time |
|
Storage |
12 months |
|
Surface Dry Time |
About 2h |
| Temperature |
5 ~ 40 |
PB-303 is a kind of high quality environment-friendly waterborne powder which can be mixed with water and used for bonding ceramic tile on the surfaces of wall, ground and floor. It is easily applied and can achieve an excellent adhesion.It has strong cohesion force. Reduce the common phenomenon of tiles detaching and peeling when pasted by Portland cement.
Application:
1, Pasting ceramic tile, stone and mosaic on all sorts of wall, ground, and even the ceiling indoor and outdoor.
2, Fixed-point bonding heat-preservation, such as expanded polystyrene, stone and glass fiber, wood cement board, silencer board/dumboard, etc.
Typical Applications:
Pasting the tile adhesive and mosaic in the following base:
1, Cement mortar or plastering wall.
2, Indoor aerated concrete brick wall.
3, Plasterboard.
4,The ground buried geothermal insulated equipment.
5, Fully maintained and drying concrete layer.
6, Firm interior-wall paint.
Technical Feature:
PB-303 is a gray powder developed by PB test center, consists of cement, graded fine sand, synthetic resin and special additives. Forming a kind of ceramic tile adhesive when stirred with water:
1, Easy to paste.
2, High thixotropy, even if the heavy brick is not inserted into the interval, it will not collapse when applied in the vertical surface directly.
3, Strong bonding power, can perfectly bonded together with all kinds of traditional building materials.
4, No shrinkage after it is dry and hard.
5, Long open assembly time.
Use suggestion:
PB-303 cannot be used on the following surface layer:
1, Concrete members which are possibly serious shrinking.
2, Wall and floor which are strongly out of shape and shaky.
3, Metal face.
Construction procedure:
1, Preparation on the surface layer
1) The substrate surface should be firm, dry and clean, no grease, no wax, etc. Damp surface may extend the setting time of adhesives.
2) After laying on the surface of the ceramic tile, cement base should not be contraction, so in spring and summer, each 1cm-thick wall plastering should be maintained at least 1 week. Cement bottom ash should be maintained at least 28 days.
3) Should take steps to lower the temperature if the surface is too hot.
2, Mixing
1) Mixed and stirred PB-303 Super Stone Glue with water into paste, then put it aside for a few minutes and then
