Galvanized Metal Slitting Line 50Hz For Hot Rolled Coils , 1600mm Width
- Application:CR/HRC/stainless steel /galvanized
- thickness of coil plate:1-6mm
- width of coil plate:1600mm
- coil weight:20MT(max)
- line speed:0-40m/min
Hydraulic Steel Slitter For Stainless Steel 6mm Thick , Green
Specifications:
|
Application: |
CR/HRC/stainless steel /galvanized and so on |
|
thickness of coil plate: |
1-6mm |
|
width of coil plate: |
1600mm |
|
coil weight: |
20MT(max) |
|
coil I.D: |
450-800 |
|
coil O.D: |
2000mm |
|
the diameter of slitting blade shaft |
240 |
|
slitting blade: |
Φ240Xφ420X20 |
|
material of slitting blade: |
9CrSi |
|
the hardness of slitting blade: |
HRC58°-60° |
|
recoiler I.D: |
φ508 |
|
power: |
380V/50Hz/3Ph |
|
tolerance of width error: |
≤±0.05mm/2M |
|
line speed |
0-40m/min |
|
area of the whole machine: |
30m(L)x6m(W) |
|
Production orientation |
from left to right |
1. Hydraulic entry coil car
The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.
It is driven vertically by hydraulic cylinder with four guide pillars.
The level movement is driven by cycloid motor .
The capacity it can carry is 20 Tons(MAX).
2. Hydraulic double bracing de-coiler
Supporting the coils and doing uncoiling.
It is designed with the double hydraulic movable structure
The hydraulic cylinders on both sides drive the landscape orientation movement.
It is equipped with the brake devices and taper decoiler and the hydraulic brake wheel.
3. Press and straightening machine
