Dial elbow
The elbow between the center of the disc rotatable about the center axis
of rotation of 360 ° applies to the turning radius smaller occasions,
can reduce the frictional resistance generated when the chain through
the elbow, and convenient.
Lift -bend curved track
For the conveyor chain walking to rise and fall at the standard diameter
of 1.2 * 180 °, any angle cutting can be done according to the
installation site.
Straight track
For conveyor chain walking straight and level at Standard length of 3
meters. You can do any length according to the installation site
cutting.
Checkingrail
There is a can open the opening of the track. Through this opening,
disassembly, inspection and maintenance of conveyor chain, each conveyor
line drive device should be configured with a set of check rail. It is
generally located in the drive unit exported to the tensioning device,
to facilitate inspection, repair place.
Temperature telescoping tube
I plant the production of the telescoping tube when the transmission
lines by temperature changes in a larger area, complement regular device
designed to absorb orbit due to elongation and shortening.
Horizontal curved track
Walking the horizontal bend for the conveyor chain, standard diameter
Φ0.8m-2m X180 ° for any angle cutting according to the installation
site.
