Product Description
LXB model explosion proof overhead crane specificatons
1.Cap: 0.5t, 1t, 2t, 3t, 5t
2,Span:3-16m
3.Lifting height:6-30m
4.Working duty:medium
5.Power source:3p 380V 50Hz
6.I-beam:120a~145c
7.Lifting speed of hoist:8 8/0.8m/min
8.ISO9001
LXB Model 0.5-5t Explosion proof LX Model single Beam Suspension Crane and HB (BCD) model and HBS (BMD) model electric hoist are used together as a complete set.
It is a light duty track traveling crane with trajectory which applies to and used at machinery, assembling sites, and warehouse. This product adopts ground controlling and works at a temperature of -20~40degrees.
The end trucks of the underslung bridge crane ride on the bottom flange of the runway beam. Typically, an underhung runway is suspended from the roof of the building and is available only on lighter capacities, usually 10 tons or less
LXB model explosion proofoverhead crane technical Parameters
Lifting capacity (ton) | 0.5, 1, 2, 3 | 5 | |||
Span (m) | 3- 16 | 3-16 | |||
Crane Travelling Device | Travelling speed (m/min) | 20 | 20 | ||
Reducer ratio | 28.2 | 30.4 | |||
Motor | YBZD12-4, 2x0.4Kw, 1380r/min | YBZD21-4, 2x0.8kw, 1380r/min | |||
Lifting device (Electric hoist) And hoist travelling device | Electric Hoist model | CD1/ MD1 | |||
Lifting speed (m/min) | 8, 0.8/8 | ||||
Lifting height (m) | 6, 9, 12, 18, 24, 30 | ||||
Travelling speed (m/min) | 20; (30) | ||||
Motor | Taper Squirrel-cage type | ||||
Work duty | Middle grade, JC=25% | ||||
Power supply | 380V, 50Hz, 3-Phase | ||||
Wheel Diameter | 130mm | 150mm | |||
Rail Surface width | 120a 145c | ||||
Payment Terms︰ TT
After-sales Service promises:
Ⅰ. Quality problems of products sold by our company will be solvedas per the"Three Guarantees"system of our company by the "Three Guarantees"service team;
Ⅱ.Related personnel will be sent to the site immediately after receiving quality complaints(by call,letter or oral notice)from clients;
Ⅲ.Personnel involved in after-sales service shall be serious and considerate in handing the problem to make clients crane-free;
Ⅳ.In addition to solve quality problems,personnel involved in after-sales service shall train clients,answer their technical inquiries and related questions free of charge.
Ⅴ.Related cost for products with quality problem will be shouldered by our company.Our company charges for quality problems caused by clients (or problems after the warranty term ),but the charge will not be higher than the expense(or cast);
Ⅵ.Establish the client-orient concept to offer timely,serious,sonsiderate and complete service,and value the image of the all the time to serve the company and clients.
If you want to know more or don't understand, please contact us.
