12v dc to 220v ac 1200w ups pure sine wave power inverter / converter with charger
Specifications
2) Pure sine wave output
3) High efficiency
4) Voltage overload protection
| Model: DXP1212WUPS-10A | Wave form: Pure sine wave |
|
Charger: 10A Continuous power: 1200W |
UPS: Bidirectional shift Surge power: 2400W |
| Rated input volt: 12V 220V DC | Input voltage range: 10-16VDC |
| Output volt: 220V 12V DC | Frequency: 50/60Hz |
| THD: <4% | Standby input power: <10W |
| Efficiency: >87% | Max outer temperature: <65°C |
| Cooling: Fan | Overload and short-circuit protection: Yes |
|
Dimension(L*W*H): 355*150*70MM Battery chip cord length: 70cm(optional) |
No load current draw: <0.6A
|
|
PROTECTION SPECIALTY |
|
| Input low voltage protection: 10.5V+-0.5V DC | Input high voltage protection: 15.5V+-0.5V DC |
| Low input voltage alarm: 11V+-0.5V DC | Temperature protection: >70°C |
| Operating temperature: -20°C ~ +40°C | Storage temperature: -30°C ~ +80°C |
| Input anti-access protection: Self repair | Output short-circuit protection time: 2~3 seconds |
|
Output overload(>1800W) protection time: 2~3 seconds |
Output overload(<1500W) protection time: 30 seconds |
| STATUS INSTRUCTIONS |
| Proper functioning indication: Green lighting constantly |
|
INPUT VOLTAGE ABNORMAL INDICATION: 1. Input low-voltage protection: Red light and have A long whistle sounded 2. Low input alarm: Red light flashing, make bumming sounds 3. Input high voltage protection: Red light and have A long whistle sounded |
|
OUTPUT ABNORMAL INDICATION:
1. Output overload: Yellow light bright, after 30 seconds, light will turns red, and have A long whistle sounded 2. Output overload or short-circuit protection: short-circuit 2~3 seconds, the light turns red and have a long whistle sounded |
|
PURE SINE WAVE: As inductive load, is good to run precise instrument. |
MODIFIED SINE WAVE: Suitable for general electrical equipment |
