RF MOSFET Power Amplifier Module RoHS Compliance 400-470MHz 55W 12.5V 3 Stage Amp.

Trade Term: FOB
Payment Terms: T/T,WU,Paypal
skype
Trade on HiSupplier, Worry Free Guarantee
Trading safety, secure your money, lower the risk, protect both buyers and suppliers
HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews
Basic Info.
  • RF MOSFET: Power Amplifier 
  • RoHS Compliance: rf module 
  • Model No.: RA55H4047M 
  • Place of Origin: Guangdong  

DESCRIPTION

The RA55H4047M is a 55-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the 400- to 470-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases.  With a gate voltage around 4V (minimum), output power and drain current increases substantially.

The nominal output power becomes available at 4.5V (typical) and 5V (maximum). At VGG=5V, the typical gate current is 1 mA. This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power.

 

FEATURES

• Enhancement- Mode MOSFET Transistors

(IDD≅0  @ VDD=12.5V, VGG=0V)

• Pout>55W, ηT>35%  @ VDD=12.5V, VGG=5V, Pin=50mW

• Broadband Frequency Range: 400-470MHz

• Low-Power Control Current IGG=1mA (typ) at VGG=5V

• Module Size: 66 x 21 x 9.88 mm

• Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power

 

RoHS COMPLIANCE

• RA55H4047M-101  is a RoHS compliant products.

• RoHS compliance is indicate by the letter "G" after the Lot Marking.

• This product include the lead in the Glass of electronic parts and the lead in electronic Ceramic parts.

However, it is applicable to the following exceptions of RoHS Directions.

1.Lead in the Glass of a cathode-ray tube, electronic parts, and fluorescent tubes.

2.Lead in electronic Ceramic parts.



Send message to this supplier
Ms. Sarah Yuan (oversea sales)
Tel: 86-755-86643962
Mobile: 86-18820739215
Enter between 20 to 3,000 chatacters.
Contact Method
Shenzhen KYL Communication Equipment Co.,Ltd
4th Floor, Building 3, No. 335 of Zhuguang Road, Xili, Nanshan, Shenzhen, Guangdong, China (Mainland) / 518055
Fax: 86-755-83408785
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!
Buyer Help Center