ROHS Approved 20KW Ultrahigh Frequency Induction Heating Equipment For Hot Fitting
Quick Detail:
|
Name |
ROHS Approved 20KW Ultrahigh Frequency Induction Heating Equipment For Hot Fitting |
Application |
Hot forging, hot fitting, smelting, surface quench, welding, annealing |
|
Work power |
360V-520V |
Out power |
20KW |
|
Product size |
main: 560*260*560mm transformer: 390*260*370mm |
Certificate |
CE , SGS , ROHS |
Specification
|
Model |
GYH-20AB (Three phase) |
|
Work power |
360V-520V |
|
Maximum input current |
30A |
|
Output power |
20KW |
|
Fluctuating frequency |
50-250KHZ |
|
The flow rate of cooling water |
0.2Mpa, 6L/min |
|
Water temperature protection point |
40C |
|
Product size |
main: 560×260×560 mm transformer:390*260*370mm |
|
Net weight |
main: 28kgs transformer: 16kgs |
Major Features
-
20KW Three phase Ultrahigh Frequency Induction Heating Equipment adopts Soft-switch ultrahigh frequency technology and two poles closed loop control technology; and our company fully owns the independent intellectual property rights
-
Fluctuating frequency can be 100K-1.5MHZ, control the depth of surface quenching, which can totally replace the high frequency of vacuum tube.
-
20KW Three phase Ultrahigh Frequency Induction Heating Equipment can continuously work for 24 hours, and 100% duty cycle.
-
Parts of power devices are all from well-know brand products
-
Ultra-small size and weight; High efficiency, energy saving and environmental protection with safety.
Major Scope of Application
-
Quench for shaft, gear and inner hole of mold, quenching depth can be within 2mm.
-
Carbon steel and stainless steel screw coating
-
Continuously quench for saw blade, anneal and quench fro stainless steel, alloy steel thread.
-
Welding for hard alloy saw blade, reamer, communication cable joint, and filter capacitor.
-
Welding for joint of metal tube, and continuous welding of stop valve.
Operating Principle
Frequency conversion electromagnetic induction heating or induction heating for short is a method for heating metal materials by converting power frequency power supply into that of specific range based on the principle of electromagnetic induction. It is mainly applicable to the metal hot working, heat treatment, welding and melting. This type of heating technique is a
