CNC Routers can be used for engraving all kinds of complicated and beautiful solid items and crafts, but currently the 3D software can only produce simple or common designs. A large quantity of beautiful and complicated handcrafted cannot be created by design software manually because of the difficulty, so 3D laser scanner is developed for this purpose to meet the requirement of producing products with complicated designs by CNC Router.
LIMAC 3D laser scanner turns CNC Router into an effective 3D scanner copying machine by shortening more than 90% time of creating complicated designs on software and saves your cost of labor and time. Our 3D laser scanner has proven to be very useful in a wide range of industries: stone, wood, foam, architecture, mould and tooling.
The probe comes packaged with all devices needed for digitizing or tool setting. An instruction sheet is also included for converting between probe and tool setter along with maintenance instructions and Certificate of accuracy.
· The probe is a 5 way triggered sensor and has a long lasting ruby tip (2 mm, 0.079" diameter).
· The probe will work with other Controllers that have probe input capabilities.
· It is Rated to10,000,000 points at 20,000 points per hour .
· The Probe will allow you to scan 3D surfaces and create machinable 3D .Stl files for part reproduction.
· Simple, quick conversion from contact probe to tool height setter
· The tool setter disk is made from hardened and ground, tool steel contact
· The Probe roundness error is less than 0.025mm
· The Probe diameter error is less than 0.025mm
· The Probes repeatability deviation is less than 0.025mm
· 1.8M O/A Shielded flying cable included
· Standard touch probe output
· 10mm or 3/8" holding shank option
· Interchangeable Stylus, additional tips and extensions available on request
