Automatic blowing molding machine Can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.
The 160L drums, tool boxes and auto parts series consists of DHB90 Automatic blowing molding machine.,which can be used for producing drums, tool boxes and hollow parts of all kinds. Materials of PE, PP, and ABS can be used. Maximum capacity of accumulator head can be 12L while volume of products can be 160L. Its control system adopts closed loop control imported from Europe and hydraulic system is pressure-flow double proportional control equipped with variable plunger pump to ensure fast and smooth operation of the machine and energy consumption of the hydraulic system can be reduced by 30% or above, saving considerable electricity.
The Machine Can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.
Setting:
Clamping----------Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system--------Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system----Japan PLC+Imported HMI+PLC automatic
Specification |
| DHB80 | DHB90 | DHB100 | DHB110 |
Material |
| PE / PP | PE / PP | PE / PP | PE / PP |
Max.container capacity | L | 25 | 50 | 120 | 160 |
Number of die | set | 1 | 1 | 1 | 1 |
Output | pcs/hr | 500 | 400 | 360 | 300 |
Machine Dimension | m | 4.2×2.3×3.6 | 4.6×2.5×3.8 | 5.8×2.5×4.6 | 6.9×2.9×4.8 |
Total weight | ton | 12 | 13.8 | 18 | 20 |
Accumulator head |
| DHB80 | DHB90 | DHB100 | DHB110 |
Accumulator capacity | L | 5 | 6.6 | 12 | 18 |
Power of die heating | KW | 18 | 22 | 26 | 38 |
Number of heating zone | zone | 4 | 4 | 4 | 5 |
Die diameter | mm | 300 | 350 | 450 | 510 |
Injection pressure | Mpa | 8 | 8 | 8 | 8 |
Max.injection speed | Kg/sec | 1.5 | 1.5 | 1.5 | 1.5 |
Clamping Unit |
| DHB80 | DHB90 | DHB100 | DHB110 |
Clamping force | KN | 210 | 350 | 500 | 720 |
platen opening stroke | mm | 250-700 | 400-1000 | 500-1400 | 600-1400 |
platen size | mm | 740×600 | 880×780 | 1020×1060 | 1100×120 |
Max mould size | mm | 560×630 | 700×960 | 800×1260 | 900×1400 |
Mould thickness | mm | 250-350 | 455-510 | 360-700 | 450-750 |
Extruder Unit |
| DHB80 | DHB90 | DHB100 | DHB110 |
Screw diameter | mm | 80 | 90 | 100 | 120 |
Screw L/D ratio | L/D | 25:1 | 30:1 | 30:1 | 30:1 |
Extruding Volume | Kg/hr | 100-120 | 120-200 | 180-270 | 200-320 |
Screw rotation rate | r/min | 10-86 | 10-86 | 10-86 | 10-86 |
Extruder heating power | KW | 20.2 | 21.6 | 26 | 32 |
Extruder driving power | KW | 30 | 37 | 45 | 45 |
Power consumption |
| DHB80 | DHB90 | DHB100 | DHB110 |
Driving power | KW | 52 | 76 | 89 | 130 |
Heating power | KW | 36 | 44 | 60 | 78 |
