GD-0193 Automatic Lubricating Oils Oxidation Stability Tester(Rotary Oxygen Bomb Methods)
Standard
1.SH/T0193
2.ASTM D2272 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
l It is suitable to determine oxidation stability of new or in service turbine oil, which has the same components (base oil and additive). It is also a rapid method for determining the oxygen stability of new mineral insulating oils containing
l General Introduction
l It can check pressure, record test data, and calculate oxidation time for measured sample automatically. It can also end a test automatically.
l It can save test curves and test data automatically when show them on the display.
l The operators can print them out when needed.
l The test can be completed automatically without any human involvement after you start a test. This significantly lowers down the labor intensity of operators and highly improves the accuracy of test data. It is the best choice of companies for selecting an automatic instrument.
l
Instrument parameters
Power supply | AC220V±10% |
Power of heater | 2500 W |
Full scale of pressure sensor | 0～1.6MPa |
Accuracy | ±2‰ |
Temperature controlling range of oil bath | room temperature～200.0℃ |
Temperature controlling accuracy | ±0.1 ℃ |
Two test bombs | two samples at the same time |
Speed of rotary assembly | 100±5 RPM |
Angle between bomb and water surface | 30 degree |
Size | 550mm×800mm×1000mm |
Oil bath cubage | 30 L |
Weight | about 45 kg |
