The Morgen emulator is a device that during the gas use of the car,reproduces or changes the operation of a pre-existing electrical or electronic compressor in the original car equipment.The emulators adjust the setting of OEM components such as injectors.Oxygen sensors,MAP&TPS so that the vehicle will function smoothy when the fuel is switched over from petrol to CNG/LPG.
Function
1.MG-FX05 dual oxygen emulator is mainly used for dual-fuel EFI car which has a front / rear oxygen sensor(fuel / clean fuel).
2. When use cleaner fuels, the simulator under the control switch, delay cut off the fuel nozzle to stop oil supply. At the same time, providing a plurality of nozzles the oxygen signal and the previous simulation, the oxygen sensor simulation signal to the host computer of the car, so that the host computer can continue to work normally.
When using oil, FX05-D is in automatic mode to the nozzle and the original connection of the oxygen sensor,no effect.
When the blue line switch is from a gaseous state to switch to oil, FX05-D dual oxygen injectors emulator delay recovery function (ie: power-down delay after turning blue line injector circuit).
Operating voltage | DC10V-16V |
Ambient temperature | -40 ~ 105 celsius |
working life | Not less than one year |
nozzle simulation resistance | 100Ω ± 5% |
oxygen simulation frequency | adjustable (1 ~ 10HZ) |
Oxygen simulated signals
| Dual oxygen simulation (before oxygen 0 ~ 0.8V square wave, after oxygen lower communication circuits 0 to 0.4) |
delay recovery nozzle features | power-down delay after the switch is turned on the blue line injector circuit. |
Adjustable delay time | 0 ~ 2S |
