Specifications
Paint booth Ceiling media/ tackifier coated F5 scrim backed ceil diffus:1.capturing 1-10um particles,
2.for the top partcle
Paint booth Ceiling media/ ceil diffus / tackifier coated F5 scrim backed Ceiling media
Surface glue ceiling filter
Based on the market requirements, this series is improved, we reduce the cost properly, low down the dust holding capacity and increase the air flow rate, quality and cost match better.
1.capturing 1-10aam particles,
2.especially for the top part of spray booth,prefiltration
3.Low initial resistance
4.Large dust holding capacity
5.Flexible,Outlet side with net or cloth mesh to reinforce
Application: capturing 1-10μm particles,
especially for the top part of spray booth,
prefiltration mesh to reinforce through air
filter system, diffluent equally
Type: supply pads or rolls size
Media: synthetic fiber with gradual density,
surface of inlet side with adhesive treatment
EN779 class: F5
Average arrestance:96%(ASHRAE52.1-1992)
Average efficiency: 45%-55 %(ASHRAE52.1-1992)
EUROVENT4/5 class: EU5
DIN53438 Non-flammability Standard: F1
Final resistance: (suggested) 400Pa
Max. Dust holding capacity: 450g/m2
Temperature resistance: 100°C
Instant temperature: ≤120°C
Surface glue ceiling filter with net
This series is the economic development of the ceiling filters, we use the longer hot melt anti-broken synthetic fiber and high quality water resin for this series,the air flow rate was increased. It is suitable for the lower required working areas.
Model | SKT-560G | SKT-520G |
Weight: | 560gr/sqm | 520gr/sqm |
Thickness: | 20mm | 20mm |
Air Flow Rate: | 936m3/h | 970m3/h |
Initial Resistance: | 23pa | 22pa |
Final Resistance: | 400pa | 400pa |
Medium Arrestance: | 93.10% | 92.50% |
Air Velocity: | 0.26m/s | 0.27m/s |
Dust Holding: | 375gr/sqm | 362gr/sqm |
Max Temperature: | 1200C | 1200C |
Filtration Class: | F-5(DIN 24185) | F-5(DIN 24185) |
Flame Resistance: | F-1(DIN 53438) | F-1(DIN 53438) |
Surface glue ceiling filter with TC fabric
This series is the economic development of 600G, we still use longer hot melt anti-broken fiber and water resin. The only difference is that we use the production method of surface glue spray in order to reduce the cost to meet the economic demands in the markets, the capacity of dust holding and the filtration efficiency are lower than the solid glue filters. The requirements for air pressure are lower.
Model | SKT-1 560G | SKT-1 520G |
Weight: | 560gr/sqm | 520gr/sqm |
Thickness: | 20mm | 20mm |
Air Flow Rate: | 936m3/h | 972m3/h |
Initial Resistance: | 23pa | 22pa |
Final Resistance: | 400pa | 400pa |
Medium Arrestance: | 93.50% | 92.90% |
Air Velocity: | 0.26m/s | 0.27m/s |
Dust Holding: | 385gr/sqm | 372gr/sqm |
Max Temperature: | 1200C | 1200C |
Filtration Class: | F-5(DIN 24185) | F-5(DIN 24185) |
Flame Resistance: | F-1(DIN 53438) | F-1(DIN 53438) |
