Ratchet Straps-Cargo Tie Down-operating

4OPERATING INSTRUCTIONS
   FOR RATCHET TIE-DOWNS
1. Place webbing over load and attach
    hooks to solid anchor points.

2. Insert webbing through ratchet reel
    and pull until ALL slack is out of
    webbing. (Figure 1 -see chart below)

3. Pump ratchet handle to make webbing
    tight. Ratchet reel must have at least
    two layers of webbing wound around it.

4. CAUTION, too many layers of webbing
    will jam ratchet. If too much web is piling
    on ratchet reel, start procedure over, first
    removing ALL slack from webbing over
    load.

5. After load is secured, move handle down
    flat for transit. (Figure 2 - see chart)

6. To release, compress release bar and
    open handle 180 degrees. (Figure 3)