Detailed Product Description
HONDA CB125T Motorcycle Fork Scooter Shock Absorber LS-ZH-03 745mm
Description:
ZH-13
C125T FRONT DISC
FRONT TOTAL LENGTH:745MM
WIDTH OF HUB COMP:139.5MM
OUTSIDE DIAMETER OF STEEL ROD:31MM
1, hydraulic damping type rear shock absorber
Structure of hydraulic shock absorber with suction pump is similar, the difference is in the steel at the upper end of the hydraulic shock absorber is closed, and the valve holes. When the rear wheel meets the road bumps during impact, the cylinder moves upward, piston, cylinder relatively moving down. At this time,piston valves are open to the inner cavity of the piston, cylinder side of the oilwithout any resistance to the piston side. At the same time, this part of the oilthrough the small hole in the bottom of the inflow valve between the inner, outer cylinder oil cavity. This effectively attenuated the uneven road facing the shockload of vehicle. And when the wheel over the raised ground fall downward, the cylinder will follow the downward movement of the piston relative to the cylinder,will move upward. When the piston moves up the oil way at the bottom of the valve to the inner cylinder, the inner cylinder piston on the side of the oil throughholes on the underside to the piston valve. At this time when the oil flow through the small hole in the process, will be a lot of resistance, damping effect thus produced, played the purpose of damping.
Shock Absorber for scooters, motorcycles,ATVs,Electric scooters,etc.
Model:CG125,GY150,GN125,Horizon200,AG100,AG200,GY150,CM250,CBT,CD110,CH125,CY80,DY100,
YH110,FXD125,GS125,JH70,GL125,V50,WY125,XH90,YB100,YH125,WY Princess
Applications:
A shock absorber is a device fitted near the wheels of a car, a scooter, a motorcycle,a ATV or other vehicles to reduce the effects of travelling over uneven ground.
Specifications:
LS-ZH-03 for CBT, Disc brake
Front:
Length:745mm±2
Width of Hub Comp.:140mm
Outside Diameter of Steel Rod:θ33/ 31 /37
Tag :
custom motorcycle parts
,
