Intelligent walk through Turnstile Security Products automatic access control
Material using a standard 304 stainless steel cabinets design professional chute can be installed in indoor, outdoor, suitable for buildings, pavilions, gymnasiums and other occasions, with the count, attendance, current limiting function.
|
Specification |
|
|
Power consumption |
50W |
|
Housing Size |
1200*180*1000mm |
|
Housing material |
1.5--2mm, 304# stainless steel, corosion resistant |
|
Drive motor |
NA |
|
Channel width |
900-1500mm |
|
Pass speed |
40 persons/min. |
|
IP protection |
IP44 |
|
Input singal optional |
DC12V/dry/contact/RS485/RS232/Remote) |
|
railing-off against power off |
Yes |
|
Working enviroment temperature |
-10°C to 50 °C |
|
Working environments |
indoor,outdoor |
|
Relative humidity |
≤90% coagulation free |
|
MCBF |
3,000,000 cycle |
Feature:
1. Fault detection and alarm function, user-friendly maintenance and use
2.The main control panel built small button, the device can be set to run state
3.Mechanical structure and Blockage when in the process of the brake reset within
a predetermined time,click stop working automatically, the default reset again after a delay, and the intensity is very small(2kg)
4. Sound and light alarm function : with trespassing, trailing alarm
5. Scour protection function : when the gate signal is not received, the stick is automatically locked
6 .Synchronization function
7, With automatic reset function, namely to obtain permission lock after the set time. There is no lock, swing gates automatic cancellation of this authority back to the initial state. (the standard is gate turns on 5 seconds will be automatically reset)
8.With the power drop-shot function. The railing falls in case of power-off, rise automatically in case of power-on.
9.Can be mounted with a variety of reading devices, receiving relay switch signal
10.signal or bi-directional control access
11. Realization of remote control and management through computer management
Tecnical:
1 . Structure:Stainless steel shell 304/2.0 and 1.5
2.Boundary dimension:1200*160*1000mm
3.weight: 70kg
4. Swing arm length: 500mm-900mm
5. Swing arm maximum tolerance: 30kg
6. Transmission Angle of swing arm: 90°
7.Swinging direction: bid-direction
8.Power supply voltage: AC220 ± 10% V, 50HZ
9.drive motor: brushless DC motor (24V)
10.access speed :30-40 / min
11.power on the prevailing state required time: 3 seconds
12.failure automatically reset after time: 10 seconds
13.input interface: dry contact signal or +12 V level signal or pulse width ≥ 100ms DC12V pulse signal, driving current ≥ 10mA;
14. Working environment: indoor, outdoor (with shed)
15.Temperature: -10 °C ~ 50 °C Relative humidity: ≤ 90%, no condensation
