CG125-8 CG200 CG150 Copper GASKER ASSY for Motorcycle Magneto Coil
Product Description:
Uses: motorcycle magneto coil
Voltage: 12V)
Power: 300 (W)
Size: 98 * 30 (mm)
Materials: brass, thick wire
Model: CG25-8
Applicable models: CG125
Stator coil:
Insulated conductors embedded in stator slots, the winding is composed of elements.
Stator core:
The stator core is an important component constituting the motor flux loop and fixed stator coil, which consists of punching and pressing all kinds of fasteners to form a whole.
Basic requirements of the stator core:
1) good magnetic properties, low loss.
2) stiffness, vibration better.
3) on the structural arrangement has good ventilation.
4) After the laminated iron core inside diameter and groove dimensions shall meet the accuracy requirements of the design. In addition, large-scale and large-scale hydro turbine generator core has special requirements, such as large hydro seam gap to ensure distinguish core, otherwise it will lead to core vibration motor is running. Stator core lamination thickness is 0.5mm or hot-rolled, cold-rolled silicon steel or soft iron-nickel alloy sheet made of 0.35mm punching, punching with a diameter less than 1m full circle punching, greater than 0.99mm in punching with fan
Ventilation slots and grooves channel piece by piece composed piece on each tooth slot on the spot one or two channels.
Stator core fastening: unobstructed full circle with external pressure mounted punching, fan-punching using the internal pressure loading.
3.2
Three-phase asynchronous motor stator windings:
Three-phase asynchronous motor rotating field windings pass to rely on AC current to build.
As such,
Stator windings must
After his pass to ensure that when the three-phase alternating current,
Rotating magnetic field which is established close to the sine wave and the rotating magnetic fields around the
Group itself induced electromotive force is symmetrical.
3.2.1
The basic requirements of three-phase asynchronous motor stator windings and classification
1
The basic requirements for the stator windings
1) After the current through the windings must be formed into a predetermined number of pole pairs, it is determined that the correct connection.
2) three-phase windings on the spatial arrangement must be symmetrical,
To ensure that the three-phase MMFs and force symmetry.
This requires not only
The number of turns of each winding, the distribution of the diameter and the circumference of the same, and requires the space of three-phase windings of the axis of mutual differences
120 ° electrical angle, so the order within a range of six-phase magnetic tape for U1, W2, V1, U2, W1, V2
3) three-phase winding magnetic field created by the current distribution space should be sinusoidal and rotating magnetic field distribution in three
Phase winding EMF sine law must change with time.
4) magnetic field under certain number of conductors, build the strongest and largest induced electromotive force.
5) less copper, embedded line convenience, good insulation properties, high mechanical strength, good heat dissipation.
2) classification of the stator windings
Types of asynchronous motor stator windings lot,
Divided by the number of phases of single-phase,
Two-phase and three-phase windings;
Press the slot winding
Number of different single-layer,
Mixed double and single bunk winding;
According to the shape of winding end points,
There are concentric single winding,
Cross-type and chain of points;
There are stacked double coil winding and wave winding of the points;
The number of slots per pole per phase is an integer also share
Fractional, there grading integer and fractional slot of the slot. But the principle is the same form.
Specifications:
Material: ABS, Normal Plastic, Iron, Steel,Alloy,Copper
Description:
Engine parts for CG125,CG150 200 CG250CC such as Empty Filter, fan, shaft gear, Cylinder head, Oil pump, Belt, Crankshaft, Stents, Door Fixed, Output Shaft, Filter interface, Layering...
