Standard
1.GB/T11143 "Test Methods for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water"
2.ASTM D665-12 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
3., IP135
It is suitable to determine rust-preventing characteristics of inhibited mineral oil, especially the rust-preventing characteristics of turbine oil to iron parts in the presence of water.
General Introduction
It is also suitable to determine rust-preventing characteristics of other oils, such as hydraulic pressure oil, circulation oil, as well as liquids heavier, whose gravity is greater than water. The instrument has function of temperature controlling, timing, and alarming.
Feature
1. It adopts digital temperature controller, heater and stirring motor to form the constant temperature bath. The temperature in bath is uniform.
2. It equips a timer to control test time and automatic timing.
3. It equips four sample testing holes. It can do determine four samples at the same time. The test efficiency is high.
Technical parameters
Power supply | 220 V±10%, 50 Hz |
Temperature controlling range | 0～100℃ |
Temperature controlling accuracy | ±1℃ |
Temperature sensor | PT 100 |
Temperature display mode | Digit display |
Timing range | 1 min to 24 hours |
Speed of stirring motor | 1400 RPM |
Speed for sample stirring | 1000±50 RPM |
Sample hole: | 4 pieces |
Total power consumption | not more than 1800 W |
