Stainless Steel Home Electric Heating Pipe / Electric Tubular Bath Water Heat Rod
Quick Details
110V/230V/480V,1500W-3000W
electric tube heater elements: Ni-Cr or FeCr
electric tube heater length tolerance: +/- 1mm
electric tube heater material: SS304;SS316,SS321,INCOLOY800 etc
electric tube heater probe diameter: 3-30mm
electric tube heater length: 100mm 200mm 300mm etc
electric tube heater max wattages: 8w/cm2
Function: Adjustable Thermostat,Deodorization,Lighting,Overheat Protection,Remote Controlled,
Tip-Over Protection,Ventilation,Waterproof
Use: Bathroom,Bedroom,Garden,Living Room
Installation: Ceiling,Desktop,Freestanding,Portable,Underfloor,Wall Mounted
Electric Heater Tube structure of tubular heating element:
| Electric Heater Tube HI-POT TEST | 1500V/S min cold condition |
| Electric Heater Tube insulation resistance | 20M Ω min |
| Electric Heater Tube leakage current | 0.75ma max |
| Electric Heater Tube power tolerance | +5%,-10% |
| Electric Heater Tube voltage | 12V-480V |
| Electric Heater Tube diameter range | 1mm to 40mm |
| Electric Heater Tube heating resistance wire | 0Cr25Al5,Cr20Ni80 or as custom's requirement |
| Electric Heater Tube air tubular heater wattage | ≥ 2w-10w/cm2 |
| Electric Heater Tube water tubular heater wattage | ≥ 6w-20w/cm2 |
| Electric Heater Tube dies and fin tubular heater | ≥ 8W-15w/cm2 |
Industrial Finned Air Heater
Industrial Finned Air Heater are constructed like basic tubular elements with the addition of continuous spiral fins, 4-5 per inch permanently furnace brazed to the sheath. Fins greatly increase surface area and permit faster heat transfer to air, resulting in lower surface element temperatures.
Electric tube heater feature:
1.We offer standard as well as customized models
2.We offer different tube diameters like 6 mm, 8 mm, 11 mm, 12.5mm, 16mm & 18mm
3.We offer different sheath materials. It can be availed in different materials like Incoloy 800, SS 304, SS 321, SS 316, Copper & Titanium
4.We offer various shapes as customer demand:immersion heater with flange or screw, explosion proof heater.
5.Various terminal options are available
Electric tube heater application:
Drying------Heat Treating------Annealing------Load Banks------Curing
Electric heating tube is consist of shell, exothermic material and filling material.
The shell is made of metal.The exothermic material is made of high resistance electric thermal bonding wire which has a good insulation performance filling and compaction around the heating wire. The filling material is made of high thermal conductivity of high purity magnesium oxide. This product has the feature of high inherent power, high thermal effect, heat faster.
