No broken grinding media ball for mining for ball mill 20-150MM :
Our products:
1.Sizes:DIA20-150mm
2.Hardness: HRC55-67
3.Chemical elements:C . Si . Mn . P . S . Cr
4.Impact toughness: >12J/CM2
5.Endurance impact test: >12000
Chemical elements:
DT-1: 45# C:0.42-0.50 Mn:0.50-0.80 Si:0.17-0.37 Cr:0.2 max P: 0.035max Ni:0.25max Cu:0.25max
DT-2: 60Mn C:0.57-0.65 Mn:0.7-1.0 Si:0.17-0.37 Cr:0.25max S:0.035max P:0.035max Ni:0.3max Cu:0.25max
DT-3: 65Mn C:0.62-0.70 Mn:0.9-1.0 Si:0.17-0.37 Cr:0.25max S:0.035max P:0.035max Ni:0.3max Cu:0.25max
DT-4: B2 C:0.72-0.92 Mn:0.7-1.2 Si:0.17-0.37 Cr:0.4-0.6 S:0.04max P:0.04max
DT-5: 42Cr C:0.38-0.45 Mn:0.50-0.80 Si:0.17-0.37 S:0.035max P:.35max Cr:0.9-1.2 Ni:0.3max Cu:0.30max
Mechanical Properties:
Spec. | 42Cr | 50Mn | 60Mn | 65Mn | |
Impact Test AK.J/CM2 | ≥12 | ≥12 | ≥13 | ≥15 | |
Endurance Test Times (5m) | ≥10000 | ≥10000 | ≥12000 | ≥12000 | |
Dia 25-60mm
| Surface | ≥55 | ≥56 | ≥58 | ≥62 |
Core | ≥48 | ≥50 | ≥52 | ≥54 | |
Dia 70-100mm | Surface | ≥52 | ≥55 | ≥58 | ≥58 |
Core | ≥45 | ≥50 | ≥50 | ≥52 | |
Specification and Hardness:
Nominal diameter (mm-inches) | Diameteical tolerance (mm) | Weight of Single of forging ball in average | Number of piece of One ton forging ball in average |
20-0.8" 25-1.0" 30-1.2" 40-1.6" 50-2.0" |
+2 -1 | 32 64 110 263 513 | 31250 15625 9090 3802 1949 |
60-2.4" 70-2.8" 80-3.2" 90-3.6" 100-4.0" |
+3 -2 | 888 1410 2104 2996 4110 | 1126 709 475 333 243 |
110-4.4" 120-4.8" 130-5.2" | +4 -2 | 5457 7102 9030 | 182 140 110 |
140-5.6" 150-6.0" | +4 -3 | 11278 13871 | 88 72 |
Product Speciality
High Hardness No Breakage Good Wear Resistance Even Wearing
Applied Field
Mines Cement Plants Power Station Chemical Industries
Production process:
Certification: 
Contact:
