Masonry Wall Reinforced Mesh
Description of Masonry Wall Reinforced Mesh
Embedded in the normal thickness of a brickwork joint, expanded metal reinforcement reduces the detrimental effects of vibration and changes of temperature. The application gives brickwork increased resistance to tensional stresses. The brick wire mesh (coil mesh) assists resistance to tensile stresses where settlement occurs. Easily incorporated into mortar course, coiled for ease of handing.
Material of Masonry Wall Reinforced Mesh
Galvanised steel to BSEN 10142-DX51D+Z275 for internal use.
Stainless steel to BSEN 10088-2-1.4301 for external use.
Application of Masonry Wall Reinforced Mesh
concrete slabbing, roads, paving, foundations, marine work, bank strong rooms, partition slabs, concrete block work, asphalt guttering and so on
Masonry Wall Reinforced Mesh Installation:
Fix into mortar between brick courses leaving 25mm clearance from face of brickwork. All joints require an overlap of at least 75mm. The mesh can be laid every third brickwork course for most reinforcement.
Specification of Masonry Wall Reinforced Mesh
Thickness:0.3-0.6mm
Mesh size:12x25mm
Roll width:65mm,75mm,100mm,175mm,225mm,300mm etc.
Roll length:10m,30m,50m,100m etc.
Packing:on cartons or as your requirement.
Galvanized | Stainless | Norminal Weight | Roll Size | Recommended |
763 | 763-SS | 0.9 | 65mm x 100m | For 100mm Wall |
764 | 764-SS | 0.9 | 115mm x 100m | For 150mm Wall |
765 | 765-SS | 0.9 | 175mm x 100m | For 200mm Wall |
766 | 766-SS | 0.9 | 225mm x 100m | For 250mm Wall |
