1. Summary This adaptor is for medical use with input power ranging at 90-264Vac,single current output 24Vdc/2.5A, and peak current 6A. It provides overcurrent protection, short circuit protection, overvoltage protection and overheat protection. |
||
2. Product’s Key Features
Model | Input Voltage Range | Rated Output Voltage | Output Current Range |
Ripple(Peak) (Rated Load,bandwidth Limitation 20MHz) |
MDA60-220S24 | 90—264Vac | 24Vdc | 0—2.5A | ≤150mV |
3. Adoption Standards and Guidance
- GB/T 2423.1—2008 Environmental Testing for Electrical and Electronic Products – Part 2: Test Methods/Test A: Low Temperature
- GB/T 2423.2—2008 Environmental Testing for Electrical and Electronics Products – Part 2: Test Methods/Test B: High Temperature
- GB/T 2423.3—2006 Basic Environmental Testing procedures for Electric and Electronic Products -- Test Ca: Damp Heat, Steady State
- GB/T 2423.4—2008 Basic Environmental Testing procedures for Electric and Electronic Products -- Test Db: Damp Heat, Cyclical
- GB/T 2423.5—2008 Environmental Testing for Electrical and Electronic Products – Part 2: Test Methods/Test Ea and Guidance: Shock
- GB/T 2423.6—1995 Environmental Testing for Electrical and Electronic Products – Part 2: Test Methods/Test Ea and Guidance:Collision
- GB/T 2423.8—2008 Environmental Testing for Electrical and Electronic Products – Part 2: Test Methods/Test Ed:Free Fall
- GB/T 2423.10—2008 Environmental Testing for Electrical and Electronic Products – Part 2: Test Methods/Test Fc and Guidance:Vibration (Sine)
- GB/T 14714.1—2008 Micro-computer Systems and Equipment General Specification of Switching Power Supply
- GB/T 17625.1—2012 Limits for harmonic current of low voltage electrical and electronic equipment.
- GB/T 17625.2-2007 Electromagnetic compatibility limits on voltage fluctuations and flicker created by devices with rated current less than 16A under low-voltage power supply systems.
- GB/T 17626.1-2006 Electromagnetic compatibility testing and measurement techniques overview of immunity test.
- GB/T 17626.11-2011 Electromagnetic compatibility - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity test
- GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test
- GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques - RF electromagnetic field immunity test
- GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test
- GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test
- GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques – Immunity test for RF induction transmission to disturbance
- GB/T 17626.8-2006 Electromagnetic compatibility - Testing and measurement techniques - Power frequency magnetic field immunity test
- GB/T 17626.9-2011 Electromagnetic compatibility - Testing and measurement techniques - Pulse magnetic field immunity test
- GB/T 1772-1979 Test method for determination of failure rate of electronic elements and components
- QJ/T 1950-1990 Static operating system technical requirements
- GB/T 6991-1986 Representation of reliability data for electronic components
- MIL-HDBK-217F Electronic equipment reliability prediction
- GJB/Z-299B Electronic equipment reliability prediction manual
- GB9706.1-2007 Medical electronic equipment safety
4. Environmental Conditions
Serial No. | Item | Technical Indictor | Unit | Remarks | |
1 | Working temperature | 0 — +40 | |||
2 | Storing temperature | -20 — +85 | |||
3 | Relative humidity | Working | 20—90 | %RH | |
Storing | 10—95 | ||||
4 | Altitude | ≤3000 | m | ||
5 | Cooling-down method | Natural cooling |
5. Power Features
1. Input Features | |||||
Serial No. | Item | Technical Requirements | Unit | Remarks | |
1.1 | Power type | Category | |||
1.2 | Rated input voltage | 100—240 | Vac | ||
Input voltage range | 90—264 | ||||
1.3 | Input frequency range | 47—63 | Hz | ||
1.4 | Rated input frequency | 50/60 | Hz | ||
1.5 | Max input current | 2 | A | 90VAC | |
1.6 | Input inrush current | ≤60 | A | VIN=240Vac input/ 25/cold on the first boot (Capacity should be released completely. Measure at any phase angle of input voltage.) | |
1.7 | Power on delay time | ≤2 | S | 220VAC/full load | |
1.8 | Shutdown time | ≥10 | mS | 110VAC/full load | |
1.9 | No-load power consumption | 2 | W | ||
2. Output features | |||||
2.1 | Output voltage range | 24.00—24.60 | Vdc | Full input voltage, full load range | |
2.2 |
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|