Replaceable Sleeve Drilling Stabilizer for Oil Processing Equipment HF1000, HF2000
Specifications:
1. Material:4 145H, 4145Mod, 40CrMnMo, etc.
2. UT: ASTM A388
3. Smelting method: EAF+LF+VD
4. Heat treatment: normalizing + tempering + Q&T
5. Chemical components(%):
C | Si | Mn | P | S |
0.43~0.49 | 0.20~0.35 | 1.05~1.20 | ≤0.025 | ≤0.025 |
Cr | Ni | Mo | Cu |
|
1.05~1.25 | ≤0. 25 | 0.25~0.35 | 0. 20
|
|
6. Standard Stabilizer Sizes:
Hole size | Body OD | Fishing Neck length | Blade Length | Blade Width | Tong Space | Bore | Oal Length |
8 | 4 3/4 | 30 | 15 | 3 | 25 | 2 1/4 | 72 |
8 1/2 | 6 1/2 | 30 | 18 | 3 | 27 | 2 13/16 | 78 |
12 1/4 | 8 | 30 | 18 | 3 1/2 | 28 | 2 13/16 | 83 |
12 1/4 | 9 1/2 | 30 | 18 | 3 1/2 | 28 | 3 | 83 |
14 3/4 | 8 | 30 | 18 | 3 1/2 | 30 | 2 13/16 | 90 |
14 3/4 | 9 1/2 | 30 | 18 | 3 1/2 | 30 | 3 | 90 |
16 | 9 1/2 | 30 | 18 | 3 1/2 | 30 | 3 | 92 |
17 1/2 | 8 | 30 | 20 | 3 1/2 | 30 | 2 13/16 | 94 |
17 1/2 | 9 1/2 | 30 | 20 | 3 1/2 | 30 | 3 | 94 |
20-26 | 9 1/2-11 | 30 | 22 | 4 | 30 | 3 | 110 |
The Stabilizer size is designed according to customers’ requirements. | |||||||
Wear-resisting belt types are HF1000, HF2000, HF3000, HF4000. | |||||||
Replaceable sleeve stabilizer is made up of a body and a centralizer body, and its advantage is quickly replaced by centralizer body when the front is wear and failure. It is flexible and especially suitable to play directional well.
Applications:
Replaceable sleeve stabilizer is an important tool of oil, gas and geology exploration drilling engineering, prevent well deflection. It is mainly used in setting with arger in rigid drill collars and drilling pressure to make well deflection rate and orientation rate smaller, improving well deep quality and drilling speed, reducing the drilling cost.
