◆Energy Saving: use the wasting refrigeration capacity caused by the low-pressure side of accumulator to cool the liquid in the hi-pressure side liquid receiver.
◆Higher Refrigeration Effective: because the heat exchange between the accumulator and liquid receiver, increase the over-heating of the system, and increase the refrigeration effective.
◆Avoid the liquid compression: insure that no liquid return into the compressor and causes liquid compression.
◆No condensation drops of water and no preservation material needed
◆Saving works installation material and installation space.
◆Looking beautiful and diaphanous. No drop lubricant causing mold and smelly. No pollution to the environment.
| TYPE | Compressor | Evaporating Temp. | High Pressure Total Volume(L) | Low pressure | High pressure Conn. | Low pressure Conn. (in) | H | H1 | H2 | H3 | A | B |
| Total Volume | ||||||||||||
| BLR/HSAR-3074 | 1 | 5 | 0.8 | 0.4 | 3/8 | 1/2 | 7.2 | 6 | 1.2 | 1.9 | 5 | 3.5 |
| 0.75 | -10 | |||||||||||
| 0.5 | -30 | |||||||||||
| BLR/HSAR-304 | 1 | 5 | 0.9 | 0.5 | 3/8 | 1/2 | 9.6 | 7.3 | 1.9 | 1.9 | 4 | 3 |
| 0.75 | -10 | |||||||||||
| 0.5 | -30 | |||||||||||
| BLR/HSAR-305 | 2 | 5 | 1.7 | 0.8 | 3/8 | 5/8 | 9.8 | 7.5 | 1.9 | 1.9 | 5 | 3.5 |
| 1.5 | -10 | |||||||||||
| 1 | -30 | |||||||||||
| BLR/HSAR-307 | 5 | 5 | 3.2 | 2.4 | 3/8 | 7/8 | 12.4 | 10 | 2.4 | 2.8 | 6.5 | 5 |
| 3 | -10 | |||||||||||
| 2 | -30 | |||||||||||
| BLR/HSAR-411 | 10 | 5 | 4.5 | 4.2 | 1/2 | 1 3/8 | 13.6 | 9.8 | 3 | 3.1 | 8.6 | 6.5 |
| 7.5 | -10 | |||||||||||
| 5 | -30 | |||||||||||
| BLR/HSAR-513 | 15 | 5 | 5.8 | 5.2 | 5/8 | 1 3/8 | 16 | 12.1 | 3 | 3.1 | 8.6 | 6.5 |
| 10 | -10 | |||||||||||
| 7.5 | -30 | |||||||||||
| BLR/HSAR-515 | 20 | 5 | 8 | 6.3 | 5/8 | 1 5/8 | 17.5 | 14.8 | 3 | 3.1 | 8.6 | 6.5 |
| 15 | -10 | |||||||||||
| 10 | -30 | |||||||||||
| BLR/HSAR-721 | 40 | 5 | 12 | 10 | 7/8 | 2 1/8 | 18.1 | 15 | 3 | 4.1 | 10.7 | 8.6 |
| 30 | -10 | |||||||||||
| 20 | -30 |
