Specifications
1). from 2-7/8" to 6-5/8"
2)AISI 1340 steel pipe and AISI 4145H or 4137H tool joints.
The heavy Weight Drill Pipe (HWDP) was developed to provide a gradual transition from the drill collars to the drill pipe. This HWDP helps to prevent stress concentration at the top of the drill collar. It also allow drilling at higher rpms, reducing torque and differential pressure sticking. The HWDP is intended primarily for directional drilling. As it bends easily, it simplifies directional control and minimizes connection fatigue problems common to high-angle or horizontal drilling. The reduced number of pipe failures and increased drill-stem service also make HWDP appropriate for some straight-hole applications. Various combinations of HWDP, drill collars, and standard drill string can be created to meet the challenge of severe drilling conditions. We can supply integral HWDP from 2-7/8" to 6-5/8". Also we can supply friction welded HWDP, which is assembled with AISI 1340 steel pipe and AISI 4145H or 4137H tool joints.
Technical Parameter of HWDP:
HWDP | Pipe Body | Tool Joint | Weight | ||||||
D (mm) | d (mm) | Upset Dimension | RSC Type | DJ (mm) | I.D. (mm) | HSC Bevel DF(mm) | Kg/Pc | ||
Center Dia. DM(mm) | End Dia. DTE(mm) | ||||||||
3-1/2 | 88.9 | 57.4 | 101.6 | 98.4 | NC38 | 127 | 52.4 | 116.3 | 312 |
3-1/2 | 88.9 | 57.2 | 101.6 | 98.4 | NC38 | 127 | 57.2 | 116.3 | 282 |
4 | 101.6 | 65.1 | 114.3 | 106.4 | NC40 | 133.4 | 65.1 | 127.4 | 370 |
4-1/2 | 114.3 | 69.9 | 127 | 119.1 | NC46 | 158.8 | 69.9 | 145.3 | 558 |
5 | 127 | 76.2 | 139.7 | 130.2 | NC50 | 168.3 | 76.2 | 154 | 672 |
5-1/2 | 139.7 | 92.1 | 152.4 | 144.5 | 5-1/2FH | 184.2 | 92.1 | 170.7 | 776 |
6-5/8 | 168.3 | 114.3 | 184.2 | 176.2 | 6-5/8FH | 203.2 | 144.3 | 195.7 | 964 |
Theory
1. Hardbanding
HWDP's wear resistance hardbanding is welded by an automatic machine after preheating the pipe and tool joints.
Standard Bands:
* one 4" wear band on both pin and box end, plus one 1" band on 18°shoulder of box.
* two 3" wear bands on central upsets
the hardbanding is completely flush on both tool joints and 1/8" oversize on the central upset(fully flush on request).
The types of Hardbanding include Iron-Matrix powder alloy, Tungsten Carbide Sparticle, Arnco 100XT AND 300XT and TCS.
2. Internal Plastic Coating
HWDP could be coated internally with DPC, TK 34 or TC2000 as customer's request, which are able to prevent corrosion and extend using time.
3. Initial Make up and Break out service
The factory Make-up and Break-out services, which is the most important factor affecting the life of the connections, is regarded as an important element to greatly improve the efficiency on rig floor. The Controlled Make-up & Break-in procedures are consistently applied to every tool joint and ensure the connections quality. Suitable dope and correct toque value are essential for the Make-up & Break-in procedures. HWDP will supply perfect factory Make-up and Break-out services if order and inquiries
Material
we offers both integral and friction welded types of heavy weight drill pipes. The material of integral HWDP is manufactured from one piece of AISI 4145H solid bar, fully heat treated, all physical properties are conform with API Spec 7-1 latest edition. The welding HWDP is assembly by two pieces of tool joints and one piece of central pipe by inertial friction welding. The tool joints are manufactured from AISI 4145H or 4137H alloy steel and the central pipe is manufactured from AISI 1340 alloy steel. The mechanical and chemical property of tool joints and central pipe are conformity to API Spec 7-1 latest edition
Rigid Inspection Procedures
All HWDP are inspected to comply with API standards and our own internal specifications. These inspections include visual dimensional checks, ultrasonic inspections, chemical composition and mechanical properties tests.
Cold rolled
HWDP' thread roots and stress relief features are cold rolled, which is helpful to reduce the fatigue failure of threads by minimizing crack initiation.
Company introduction
Xi'an KINGWELL OILFIELD MACHINERY Co., Ltd. (KINGWELL) is a highly reputable supplier for oilfield equipment and services to Oil & Gas industries and provides complete solutions.
With over 10 years developing, we were developed from the beginning drilling service to manufacture factory who produce OCTG, drilling tools, DST tools and Solid control products.
KINGWELL have experienced team, stronger enough to meet any challenge, we do believe honest is the base of business and cooperation; our aim is to build solid relationship with any part of honest. kingwell can provide highly efficient services to its clients resulting in accurate and timely deliveries at the best prices. Our products have been exported to Europe, American and Middle East.
