10M / 100M poe powered switch Power Injector WIth Poe Pin Out
The single port Power Over Ethernet (PoE)DC Power Injector eliminates the need for a PoEenabled equipment, such as IP Camera, IPTelephones, Wireless LAN and Bluetooth Access Points, etc..The injector is typically installed near the Ethernet hub and connected to a remote PoE device through a single Ethernet Cat 5 cable up to 100meters / 330feets .The injector can support an advanced 802.3af or nonstandard (optional) compliant device which supporting the standard PoE pin out (Pins 4&5 Power + / Pins7&8 Power -)
| Technical Specifications: | |
| LAN Data Rates: | 10/100 Mbps (802.3 10Base-T/802.3u 100Base-T) |
| Input Power Requirements: | |
| Input voltage: | 100 VAC to 240 VAC |
| Input frequency: | 47 Hz to 63 Hz |
| Power over Ethernet Output: | |
| Pin Assignment and Polarity: | 4/5 (V+),7/8 (V-) |
| Output Power: | please refer to ordering information |
| Efficiency: | 75% min |
| Short circuit protection: | auto recovery |
| Over current protection: | auto recovery |
| Front Panel Indicators: | |
| Power Indicator: | DC Power Outout (Green) |
| POE Indicator: | PD Statues (Green)* |
| Environmental Conditions: | |
| Operating temperature: | 0 to 50 |
| Cooling: | free air convection |
| Storage temperature: | -20 to +85 |
| Warranty : | 2 years hardware warranty |
| *Specifications subject to change without notice. | |
.
