RF antenna socket shield
Shield material: tinplate
F (male) connector housings
Material: Zinc alloy
Even the head of IEC
Enclosure material: SPCC surface of tin/nickel plated
Terminal pin: Copper
Conductor: Heat plastic
Uses: Suitable for high-frequency electronic tuner, RF modulator, set-top boxes, TV cards and shielded signal transmission, the signal transmission medium
Surface treatment: nickel plating
Salt spray test: according to national standards GB / T2423.17-93 medium salt spray test standard (NSS), 5% of Nacl solution spray 12 hours, washed with water and left at room temperature, the test can be 12 hours
Life test: Under no-load conditions, the speed of operation of 20-30 times per minute 5,000 times
Insertion force: The force gauge (and standard plug) between the plug and the shrapnel measurements, IEC (female)
Insertion force: 10-60N, pull force: 10-30N, F screw head (male): 3-30N
Contact resistance: frequency = 1,000Hz, current <100 mA, voltage = 20mv contact resistance ≤30mΩ
Withstand voltage: Under Canadian DC500V (50HZ or 60HZ) condition between the terminals and the terminal shell, 1 min 0.5mA continuous measurements
Insulation resistance: between terminals and between terminals and frame plus DC250V conditions, for 1 minute measurement, 100m over Europe
Heat test: put 48 hours at 85 ± 2 ℃ environment, and then placed in a normal environment for testing after 30 minutes
Moisture test: 40 ± 2 ℃, humidity 90-95% environment for 48 hours, and then placed in a normal environment for testing after 30 minutes
Vibration resistance: Frequency: 10Hz-55Hz-10Hz sweep cycle, double amplitude: 1.5mm, on three mutually perpendicular axes, each axis 2h, 6h total vibration
Appearance: No significant damage, contact resistance ≤50mΩ
Insulation resistance ≥100MΩ, voltage: AC 500V, 0.5mA, 1min, no breakdown, no arc, insertion force 10N ~ 30N
High temperature cycling:
Under proper fitting condition: -10 ± 2 ℃; 30min to 85 ± 2 ℃ after one cycle, a total of 5 cycles
Under standard atmospheric conditions, the recovery after 1h test
Appearance: No significant damage, contact resistance ≤50mΩ
Insulation resistance ≥100MΩ, voltage: AC 500V, 0.5mA, 1min, no breakdown, no arc, insertion force 10N ~ 30N
Home >
Electronic & Electrical
>
Wires, Cables & Cable Assemblies
>
Connectors & Terminals
>
RF Coaxial Connectors with shielding cans
RF Coaxial Connectors with shielding cans
Trade on HiSupplier, Worry Free Guarantee
•Trading safety, secure your money, lower the risk, protect both buyers and suppliers
•HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
- Product Details
- Company Profile
- Product Reviews
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!