3W Round LED Panel Light Ultra-Slim LED Ceiling Light With CE ROsH
Specification:
|
POWER |
3w |
|
Input Voltage |
85-265VAC |
|
Luminous Flux |
210lm |
|
CRI |
75 |
|
Color Temperature (CCT) |
2700-7000K |
|
Outline Dimension |
90*13/70mm |
Product Description
|
Item No.: |
ALS-CEI-10-1 |
|
Dimension: |
90*13/70mm |
|
Power(W): |
3w |
|
Luminous: |
210lm |
|
Material: |
Alu+ PS |
|
Efficiency: |
70 |
|
Led brand |
Epistar 2835 |
|
PF: |
≥0.90 |
|
CCT |
2700-7000k |
|
Input : |
85-265V ,50-60Hz |
|
CRI |
75 |
|
Certificate: |
CE,RoHS |
|
Service: |
OEM and ODM |
Installation:
1. Cut a hole on the ceiling where the panel light will be installed
2. Install the LED driver and imbed the panel light in the hole
3. Connect the power supply and start
Attention:
1 Use indoor or some place where no water, don’t put them in wet or dam place
2 Please check the local voltage compliance product requirements
3 Installed in a well-ventilated place to ensure appropriate environmental temperature
4 When installation, try to avoid the minefields, strong magnetic field and high-pressure region
5 Always turn power off at the circuit breaker before rewiring your fixture
Applications:
1. Commercial and exhibition locations
2. Hotel, conference room
3. Factory, office, house
4. Airport, metro station
5. School, hospital and other public places
Maintenance:
1. Pls don’t repair or maintain the product under condition user lack of professional person or knowledge for circuit,especially in absence of necessary equipment, avoiding extending the damage or breaking down the important components.
2. As there is high voltage circuit inside the product, during maintenance pls don’t dissemble or hand touch the PCB under power-on condition. There is isolation protection layer on circuit board, pls don’t touch acidic materials when you disassemble the circuit board, like sweat etc. Please use plate washer water to clean the circuit board when there is stain or dust.
