Antistatic Kapton Polyimide Masking Silicone Adhesive Tape
1.High-temp resistance tapes
2:Apply for anti-static, heat, insulation, super-sticky.
Anti-static masking tape/ ESD Kapton Tape
1.High-temp resistance tapes
2:Apply for anti-static, heat, insulation, super-sticky.
3.Die cut the tapes as your size reques
Anti-static masking tape carrying the following characteristics:
1)High temperature resistance, can reach to 300C.
2)Super-sticky, insulation and anti-static.
Tape application:
1)Mask for printed circuit boards during wave solder or solderdip process.
2)Masking for some electronic component from ESD damage, apply for notes in electronic manufacturing.
3)Applications requiring heat resistant masking, as input mounting reflow process, and the manufacturing process of all types of electronic components.
| Type: | Insulation Tape |
|---|---|
| Material: | Composite Polymer |
| Application: | High Temperature |
| Name: | Anti-static Polyester Tape/ |
| Tape: | Polyester Tape/ |
| ESD Tape: | Anti-static Polyester Tape/ |
Kapton ESD tape
1. Kapton ESD tape is made of high temperature HN series polyimide film.
2.This Polyimide tape is used in masking of circuit boards during wave soldering or other electronic manufacturing processes. It can be used in powder coating, automotive and transformer manufacturing.
3. It has high dielectric strength. Kapton masking tape, offers excellent performance in electrical and thermal insulation.
4. This Kapton tape is made of 1 Mil Polyimide material with 1.5 mil of silicon adhesive which does not leave any residue. It can withstand temperature up to 380°C.. It is packaged in 3" core and is 36 yards long.
5.Kapton Tape Applications: Electrical Insulation, Gold leaf mask of printed circuit boards during wave soldering,transformer and capacitor insulation, powder coating and high temperature applications.
Physical Properties
|
Adhesive Type: |
Silicone |
|
Backing Thickness (mm): |
0.025 |
|
Total Thickness (mm): |
0,065 |
|
Peel Strength (N/cm): |
6 |
|
Tensile Strength (N/cm): |
53 N/10mm |
|
Elongation (%): |
50 |
|
Temperature Range: |
Continuous 180 short periods up to 380° |
Chemical Properties
|
PH value of aqueous extract: |
4.0 - 6.0 |
|
Freedom from corrosive sulphur: |
No stain on copper |
Storage & Application
|
Storage: |
The conditions under which this product is stored may affect its performance. Storage should be in dry, well ventilated rooms with a constitute temperature of around 20° C and should be protected from continuous exposure to direct sunlight. |
|
Method of Application: |
The product should always be applied to clean, dry, surfaces |
