Control System:
High precision P.I.D. temperature controller to limit the temperature differences
Optional continuously or cyclic spray, apply fully automatic detecting system
Double over-heating protection systems protect both of chamber and operator.
Optional RS232 interface used to connect with computer
Specifications:
|
Model |
QCC-270 |
QCC-510 |
QCC-816 |
QCC-1200 |
||
|
Interior |
W |
900 |
1200 |
1600 |
2000 |
|
|
D |
600 |
850 |
850 |
1000 |
||
|
H |
500 |
500 |
600 |
600 |
||
|
Exterior Dimensions |
W |
1460 |
2200 |
2600 |
3000 |
|
|
D |
910 |
1200 |
1450 |
1650 |
||
|
H |
1280 |
1450 |
1550 |
1600 |
||
|
Solution Tank |
25L |
60L |
||||
|
Power Supply |
AC 220V /50HZ/1P |
AC380V/50HZ/3P |
||||
|
Ambient Temp. & Humid. Range |
+5~ +35 / <85%RH |
|||||
|
Air Pressure |
86~ 106Kpa |
|||||
|
Testing Temperature |
NSS ACSS 35±1 / CASS 50±1 |
|||||
|
Pressure Barrel Temperature |
NSS ACSS) 47±1 /CASS 63±1 |
|||||
|
Drying Test |
Chamber temperature: 40-70( ±0.5), Humidity: 30%-98% (±5%RH) |
|||||
|
Temperature and Humidity Test |
Chamber temperature range: RT-70(±2) (Low temperature: below 25 without humidity) |
|||||
|
Cooling time: -70RT within 35min |
||||||
|
Temperature uniformity: ±2 |
||||||
|
Temp. & Humid. Test |
Temperature test:45±2 |
Humidity test:85%~98% ±2%RH |
||||
|
Solution Consistence |
NaCi 5% |
|||||
|
PH Value |
NSS ACSS:6.5~7.2; CASS:3.0~3.2 |
|||||
|
Air pressure |
1.00±0.01kgf/cm2 |
|||||
|
Temperature fluctuation |
±0.5 |
|||||
|
Temperature uniformity |
2. 0 |
|||||
|
Temp. & Humid. Resolution |
0.1; 0.1%R.H. |
|||||
|
Spray quantum |
1.0~2.0ml/80cm2/h |
|||||
|
Material |
Polyvinyl chloride (P.V.C) |
|||||
|
Heater |
Corrosion-resistant titanium tube |
|||||
|
Temperature sensor |
Platinum Resistance PT-100 |
|||||
|
Controller |
LCD touch screen temperature and humidity controller |
|||||
|
Safety device |
Over-temperature protection , leakage protection |
|||||
Features:
Powerful LCD touch screen temperature and humidity controller
Optional recorder used to save temperature and humidity curve graph
Programmable control system, continuously and cyclic spray
Support power off memory, available to continue testing after power recover
Auto/manual water refilling system make sure non-stopping testing
Precision glass nozzle makes sure fog diffuses well-distributed
Auto descending and ascending system for testing cover, makes operation easy and safe
Clearly observe testing samples with auto defrost system
Salt Spray Test Chamber Conform But Not Limited Following Testing Standards:
ASTM B117 Standard Practice for Operating Salt Spray Apparatus
ASTM B368-97 Standard Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM B380-97(2007) Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
ASTM D1735-99 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM G85 - 11 Standard Practice for Modified Salt Spray (Fog) Testing
SGM-GM4465P Water Fog Humidity Test
ISO7253:2001 Paints and varnishes – Determination of resistance to neutral salt spray (fog)
ISO9227-2012 Corrosion tests in artificial atmospheres – salt spray tests
DIN 50021: Salt spray testing
JIS Z2371 Methods of Salt Spray Testing
