Magnetic Global Motorcycle GPS Tracker Cell Phone For Real Time Location
Default Main Features:
1. Real time uploads location information via time/distance interval
2. Real-time Positioning & Tracking
3. SOS emergency Alert & Power-cut Alert
4. Audio Monitoring(listen-in)
5. Geo-fence Alert & Over Speed Alert
6. Fuel Monitoring
7. Remote Stop Engine
8. Special Vehicle Monitoring (dump trucks pouring, mixers rotating, etc.)
9. Car Door Open/Closed, Air-conditioner ON/OFF Detection
10. GPS & LBS(location based service) tracking
Specifications:
|
Size |
108*56*18mm |
|
Working Voltage |
DC:6.3~24V |
|
Input Fuse |
5A |
|
Working Tem. |
-40~85°C |
|
Humidity |
10% to 90% |
|
CPU |
TI:MSP430F5419(100MHz) |
|
GPS&GSM Antennas |
Built in |
|
GSM Module |
GSM Module:SIM900 Band:850/900/1800/1900MHz, Tally with: GSM phase 2/2+ -Class 4 (2W @ 850/900MHz) -Class 1 (1W @ 1800/1900MHz) Max RF Output: 33.0dBm±2dBm Dynamic Input Range: -15 ~ -102dBm Receiving delicacy: Class RBER≤2%(-102dBm) Frequency Stability: > 2.5ppm Max Frequency Deviation: ±0.1ppm RMS Deviation: ≤5deg |
|
GPS Module
|
GPS chip set: SiRF Star III or IV Frequency: L1, 1575.42 MHz Number of Channel: 20 Sensitivity: To-159Bm Tracking, Superior Urban Canyon Performance Reacquisition: 0.1 sec, average Hot boot: 2 sec., average Warm boot: 38 sec., average Cold boot: 44 sec., average Altitude limit: 18000 m Velocity limit: 515 m/s |
|
Input I/O |
7 I/O input Port: 1 port use to check the engine ( ACC check) 1 port use to SOS 1 Analog Input port( Fuel monitoring) 1 Output port ( Car engine control ) 3 Extend digital ports ( Input/ Output control by software) |
|
Microphone |
Built in |
|
Current |
Standby Current 16mA working Current:60~150mA Current of opening infrared of Camera at night :100~200mA Charging current: Max<500mA |
|
Battery |
Lithium battery :350mA( working time is about 3.5 hours) |
|
Accessories |
Device, Connecting cable, Relay, SOS button |
Main Features:
1. Positioning and tracking:
through the online positioning platform or the cell phone to locate at any time,
and get the working status. You can choose the positioning Platform by yourself
2. Geo-fence Mode:
Set up a geo fence for the unit to restrict its movements within a district.
The unit will send the message to the authorized numbers when it breaches the district
