P8 outdoor curved LED screen module can be horizonal and vertical
Specifications:
|
Unit module |
Pixel pitch |
8 mm |
|
Pixel density(dots/sqm) |
15625/sqm |
|
|
LED encapsulation |
SMD3535 |
|
|
Driving method |
1/4 |
|
|
Module size(mm) |
256*256mm |
|
|
Resolution of module( dots) |
32*32 |
|
|
Major technical parameters |
Cabinet size |
1024*1024mm |
|
Brightness |
7500cd/ |
|
|
Refresh rate |
>2000HZ |
|
|
Color temperature |
6500K |
|
|
View angle(H/V) |
160°/140° |
|
|
Grey scale |
16bit |
|
|
Brightness adjustment |
256 grade/ Manually/ Automatically |
|
|
Working/ storage temperature |
-20~50/ -30~60 |
|
|
Working/ storage humidity |
10~90 RH |
|
|
Working voltage |
AC220/110V 50Hz |
|
|
Protect degree |
IP65/IP54 |
|
|
MTBF |
>5000h |
|
|
Life span |
100000h |
|
|
Input Signal |
AV, S-VIDEO, VGA, DVI, HDMI, SDI, DP |
|
|
Operation system |
Windows 7/XP |
|
|
Control distance |
cat-5 data cable:<100m, optical fiber<15km |
Description:
1. Module can be vertical and horizontal: We have our own module mask design. So the module can be put vertically and horizontal. This is very good for view angle.
2. Water proof available: although it is curved, there is no problem about waterproof.
3. Good color uniformity: Since 3 LED chips are encapsulated in one lamp, SMD color uniformity is much better than DIP so the showing effect is perfect.
4. Anti-low temperature: for very cold areas such as Russian market, we should pay special attention to the cold temperature. So we will use anti-low temperature power suppliers and special heat system to warm the display.
5. Good heat output system for high temperature: For hot ares, heat output system is specially important. Or else, the whole display will become hot and there will be dangerous. So we help clients to reduce current and also make add fans for screen.
6. Energy saving: power consumption is a key factor for LED billboard. BAKO’s LED display is designed with low power consumption to help clients to save energy.
7. High brightness: For outdoor application, brightness is important, especially if the LED display faces the sun directly. BAKO’s outdoor display brightness can be above 7500 nits, completely ensure the requirement for outdoor application.
8. Adjustable brightness: In the daytime, brightness should be high. But in the evening, it should be reduced for traffic safety. BAKO’s LED display can make the brightness adjusted automatically. Also, this method can help to save much energy.
9. Both front and rear service: For some special application, front service is a must. BAKO makes new design for SMD outdoor LED display.
Competitive Advantage:
1) easy front service
2) fast delievery
3) free training
4) solution provider
