350-1050mA 1-10V /push 50W Multifunction Dimmable LED Driver For LED Panel Light
Description:
1, Very easy to installation as the iput and output side used the Press-in type terminal blocks
2, with top-circuit design AC-DC-DC, no flicker
3, Dimmable LED driver with primary PUSH, secondary PUSH and 1-10V dimming interface.
4, DIP switch design is for different current and voltage selecting, maximum current up to 1050mA. Different LED light can chose the same model LED driver, save cost for purchasing and inventory management.
5, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required.
6, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.
7, Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.
8 Maximum length of the cable, from switch to last driver is 20m.
9, Factory setting: 100% dimming level and 350mA output.
10, Reset the LED diver easily by a jumper.
11, Protection: Short circuit / Over voltage / Over temperature.
12, Long life span 50,000h, 5 years guaranty.
Applications:
For office, warehouse, gas station etc.
Dimming Operation:
A) 1-10V Dim
Using the push dimming will make 1-10V dimming inactivated. The driver has to be reset to active the 1-10V dimming function again.
B) PUSH Dim
Short push (<0.1sec): Ignore, to avoid reaction on AC spike.
Short push (0.1~1sec): Switch on or switch off.
Long push (>1sec): Dimming up or down, dimming level automatically stops at minimum or maximum value.
Synchronization:
For the resynchronization to work correctly when more than one driver is connected to the same push button, follow steps of below after the drivers are connected:
A) Press push button for more than one second, followed by a short push (<1s), now, led light switches off.
B) Do a long push, the system will be resynchronized.
Specifications
|
INPUT
|
Input voltage |
220-240Vac |
|
Input frequency |
50-60Hz |
|
|
Input current |
0.26A max |
|
|
Power factor |
≥0.90 |
|
|
Efficiency(Note1) |
≥87% |
|
|
Leakage current |
0.5mA/240Vac |
|
|
OUTPUT
|
Output current/voltage and load |
350mA 16-60V DC 21W max 500mA 16-60V DC 30W max 550mA 16-60V DC 33W max 650mA 16-58V DC 41W max 700mA 16-58V DC 41W max 750mA 16-56V DC 43W max 850mA 16-56V DC 47W max 900mA 16-56V DC 50W max 1050mA 16-48V DC 50W max 12Vdc 0-1050mA 12.6W max 24Vdc 0-1050mA 25.2W max |
|
Output load range |
1x50W max |
|
|
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
About HiSupplierUser GuideFeatured Partners:
Follow Us:
Channel: madeinchina.hisupplier.com - hebei.hisupplier.com - ningbo.hisupplier.com Language Option: العربية - Nederlands- Français- Deutsch- Italiano- 日本語- 한국의- Português- Pусский- Español IPR Protection Policy - Terms of Use - Privacy Policy - Security Measures Copyright © HiSupplier.com Online Inc. All Rights Reserved. 
|
