8Ton Forging Steel Hollow Shaft For Ball Mill Max 150Ton/Pcs
Specifications:
HOLLOW SHAFT
Ball Mill And Ball Mill Hollow Shaft
Hollow shaft is the important part of the rotary cement ball mill, it has supported the running of whole grinding body, in continuous operation under the action of alternating stress, is the weakest link in the ball mill components, also the components that is the most difficult to control manufacturing quality.
They are usually made by the material of GB/T699-1999(ASTM1035/DINC35) and require a high technology to produce. No blowhole and the sand hole are allowed appears around the spherical bush and the neck of the mill shell.
To guarantee the accuracy and the smooth finish of the casting parts, the part that next to the spherical bush is needed to be polished many times. They are Cement, Metallurgy, Construction Materials, usually used in Ball Mill, Cement Making Machinery.
Hollow shaft fracture analysis of the causes
- Hollow shaft is the key part of ball mill and required a high technology to produce. Due to the structure shape is special, and R area, No blowhole, the sand hole, slag inclusion, and crack are allowed appears. Once appear these defects, will greatly increase the likelihood of hollow shaft fracture. As a result, the casting defects are the main reasons for the hollow shaft fracture.
- Usually, hollow shaft is large casting steel product, ranged from several tons to more than 10 tons in weight. In the castings will always exist within the stress concentration. If can’t deal with stress concentration timely, could also lead to crack and break.
- Due to the limitation of conditions, some manufacturers often used block casting instead of whole casting, and then weld together. If can’t guarantee the quality of welding and quality of heat treatment after welding, it is easy to produce quenched structure, stress concentration and micro crack, as a result these above could also lead to crack and break.
- During the replacing of ball mill parts, if the improper operation will cause the hollow shaft local heating temperature is too high, may cause internal stress changes, leading to fracture.
The point of Maintenance
Hollow shaft fracture is very serious equipment failure, must stop and maintenance the equipment, lest cause serious equipment accident. It is bigger difficulty to deal with hollow shaft fracture, maintenance cycle is long as well as the big intensity of labor, if do something wrong, also affect the safe operation of the ball mill, the serious influence production.
Making welding repair plan
Because of the heavy load for hollow shaft, Only use special welding method of welding cracks, can satisfy the requirement of equipment, and cannot make its heat, can only use cold welding, in order to reduce welding deformation, multiple segments inside and outside welding at the same time. Before welding, open groove with the Angle grinder, with manual arc cold welding groove. Welding requirement is to meet equipment technical requirements, ensure the normal running of the ball mill. So the key to the weld repairs: prevent deformation caused by the crack; ensure the inner quality of weld.
Our Production Capacity
We have a large foundry, with 30 ton electric arc furnace and 40 ton refining furnace; 8 m x 14 m and 4 m x 6 m heat treatment furnace; 100 tons, 70 tons, 50 tons travelling crane and other large equipment, etc. and also has a complete quality detection means. We can produce the products with carbon steel, alloy steel and other kinds of material, maximum weight of 80 tons. Sincerely welcome you to visit our factory.
Application: |
For Ball Mill Of Mining Project |
Process |
ingot → heat → forging → heat treatment(Q&T) → inspection → rough machining → UT → 2nd heat treatment → finishing machining → inspection . |
Standard: |
ASTM or GB/T3077-1999 |
Material: |
Steel (20CrMnMo, 42CrMo4, 18CrNiMo7-6, and S355+N etc.) |
Packing: |
plywood cases and pallets or as per customers' requirements |
Dimension |
According to your drawings |
Processing |
Raw material inspection →stock cutting→ heat→forging→ Heat treatment (Normalizing+ tempering) → Inspection →rough machining→UT→ 2nd Heat treatment → finishing machining →Inspection→packaging |
Equipment |
3600t, 2000t metal forging hydraulic press, |
Heat treatment: |
Normalized / Annealed / Quenched / tempered |
Surface Treatment: |
painting,plating,polishing,black oxide,transparent anti-rust oil |
Quality control: |
UT,MT,RT,PT,chemical composition test,mechanical property test,etc. |
Report: |
1, Raw material certificate(material chemical composition) |
Inspection: |
Besides our in-house inspecion, you could also choose a third party inspection. |
Standard: |
ANSI,ASTM,ASME,API,JIS,DIN,BS,EN,KS,UNI,SABS,GOST. |
Delivery condition: |
Hot forged +Rough machined (black surface after Q /T)+ Turned |
Competitive Advant |
Quality control and management to the whole produce process, includinDecided by the amount and dimensions of products. Usually we control the large diameter rings' delivery time within 5 weeks after we receive your formal order. |
Certificate: |
1, Raw material certificate(material chemical compositon) |
Competitive Advantage:
1. WCB,LCB,stainless steel, low carbon steel and alloy steel available.
2. Rich experience in materials ASTM WCB,LCB,low carbon steel and alloy steel.
3. Professional tooling and process to reduce cost.
4. Excellent surface and inner quality.
5. Electric furnace and strict chemical composition test before cast.
6. In-house professional inspection: tensile tests, impact tests, hardness tests, microstructure examination, NDT (Non-destructive Test), chemical composition inspection, etc.
7. Traceable documents for every forging
8. Technical strength: 20 technical staff, doze