12v Emergency Vehicle Jump Starter For Car And Motorcycle With Mobile Charging
Product Specification:
Model: ICB-011 Applicable Engine: 12V engine
Capacity: 12000mAh Material: High density Li-polymer and top ABS
Cycle life: can reach 3000times Full charging time: about 3 hours
Input: 12V /1A (CC/CV) Output: 5V/2A ; 12V/2A; 16V/3.5A; 19V/3.5A; 1
Start current: 200A Peak current: 400A
Laptop charging: yes Operating temperature: -20-80 degree
|
Accessories : |
Home charger 1pcs |
Package:
Product Size: L170*W38*H*30mm
Unit packing size: 33*28*8cm
Packing: Each packed into plastic try, then into a tool kit then 6pcs/carton
CTN: 60*40*35CM=0.084CBM
20GP: 6000SET
G.W/carton: 13kg
Professional manufacturer and competitive advantage:
1. Compatible with 90% electronic products
2. Built in effective smart chips
3. Multiple safety protection schemes
4. Exquisite craft appearance
5. LED light, SOS flashing light, Strobe
7. Grade A lithium polymer battery
Product Application:
- 12V for diesel/gasoline engine car starter.
- Very easy for operation.3 seconds to start your car
- Support charging for all kinds of your digital product. Can charge for smart phone , tablet , Notebook, PSS, camera etc
- Support multi-function LED light, Normal, Flash and SOS signal
- with safty hammer at emergency time
Operation of Moctorcycle jump starter
Charging for starter itself:
1. Plug the home adaper into the universal socket.
Connect 12V 1A input port of Jump Start to the other end of the home adapter.
2. Plug the car adapter into the socket of the cigarette lighter.
Connect 12V 1A input port of Jump Start to the other end of the car adapter.
For Jump Start of 12V vehicle
1.Make sure that the the number of indicator light is not less than 3.
2.Connect the red battery clamp of jump cable to the vehicle’s positive (+) battery terninal and connect the
black battery clamp of jumper cable to the vehicel’s negative(-) battery terninal.
3.Plug the cord of the jump cable into the jump start socket.
4.Start the vehicle.
5.When the vehicle start, remote jumper cable from jump starter and disconnect red and black clamps to
the vehicle battery terninal within 30 seconds.
6.Leave the verhicle’s engine running.
Charging/power supply for laptop
1. Plug the switch cable A to USB 19V 3.5A output port.
2. Select appropriate connector for your notebook and connect it to the switch cable A and your notebook
3. Press the switch button to charge/power supply.
