Constant Voltage AC DC LED Power Supply 200 Watts 24v UL LED Driver
Enclosed NE Series 15w-350w Miniature Features:
1. Universal AC input / Full range ( NES/D-100, NES-150 AC input selectable by switch )
2. Protections: Short circuit / Overload / Over voltage
3. Built-in over temperature protection for NES-15
4. Cooling by free air convection
5. Small size, high power density
6. Low cost, high reliability
7. 100% full load burn-in test
8. Most economical low wattage solution with safety certificates
9. 2 years warranty
NE Series NES-200 Single Output Switching Power Supply Features:
1. AC input selectable by switch
2. Withstand 300VAC surge input for 5 seconds
3. Protections: Short circuit / Overload / Over voltage / Over temp.
4. Cooling by free air convection
5. Built-in constant current limiting circuit
6. 100% full load burn-in test
7. LED indicator for power on
8. Low cost, high reliability
9. 2 years warranty
AC input voltage range .......90~132VAC / 180~264VAC selectable by switch
DC adjustment range ..........±10% rated output range
Overload protection ............105%~150% constant current limiting, auto-recovery
Over voltage protection .......115%~145% rated output voltage
Setup, rise, hold up time ......1000ms, 50ms, 20ms at full load and 230VAC
Withstand voltage ...............I/P - O/P: 3kVAC, I/P-FG: 1.5kVAC, O/P-FG: 0.5kVAC
Working temperature ..........-20~+50°C (refer to output derating curve)
Safety standards ................UL60950-1 approved
Packing ..............................0.93kg ; 12pcs / 12kg / 0.92CUFT
Enclosed Switching Power Supplies
NE Series:
Single Output: NES-15 / 25 / 35 / 50 / 75/ 100 / 150
Dual Output NED-35 / 50 / 75 / 100, NET-35 / 50 / 75
Single Output: NES-200, NES-350
Quick Details:
| 200W-Single Output | ||||
| Model No. | Output | Tol. | R&N | Effi. |
| NES-200-3.3 | 3.3V, 0~40A | ±2% | 150mV | 75% |
| NES-200-5 | 5V, 0~40A | ±2% | 150mV | 79% |
| NES-200-7.5 | 7.5V, 0~27A | ±2% | 150mV | 82% |
| NES-200-12 | 12V, 0~17A | ±1% | 150mV | 85% |
| NES-200-15 | 15V, 0~14A | ±1% | 150mV | 85% |
| NES-200-24 | 24V, 0~8.8A | ±1% | 150mV | 87% |
| NES-200-27 | 27V, 0~7.8A | ±1% | 200mV | 88% |
| NES-200-36 | 36V, 0~5.9A | ±1% | 240mV | 89% |
| NES-200-48 | 48V, 0~4.4A | ±1% | 240mV | 89% |
NOTE:
1. All parameters not specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. When using DC voltage as the input, please connect positive pole of input voltage to mark “L” of the terminal block and negative pole of input voltage to mark “N” of the terminal block.
NES-200 Series Datasheet:
NES Series NES-200 Models Available:
NES-200-3.3
NES-200-5
NES-200-7.5
NES-200-12
NES-200-15
NES-200-24
NES-200-27
NES-200-36
NES-200-48
