Single Channel Vehicle Loop Detector Compatible With Parking System
Quick Detail:
vehicle loop detector
- Easy installation
- Compatible with parking system
- Single loop and double loop
- Two relay out
Applications:
The WSTV-410 vehicle loop detector is a double channel inductive loop detectors. The principle is based on a change in the inductance within the loop which is caused by the metallic components of passing vehicles. The changes are picked up and evaluated by a microprocessor. Ease of use thanks to automatic calibration when the operating voltage is applied.
The loop detectors must only be placed in dry rooms or control cabinets that are protected against
all types of moisture and wetness. A distance of at least 10 mm from other devices must be maintained
on each side. The ambient temperature must not exceed 65° C. The installation of the induction loop is
described in other operating instructions. The loop detectors must only be placed in dry rooms or control cabinets that are protected against all types of moisture and wetness. A distance of at least 10 mm from
other devices must be maintained on each side. The ambient temperature must not exceed 65° C.
The installation of the induction loop is described in other operating instructions.
Specifications
Operating voltages: 12V AC/DC ±5%
24V AC/DC ±5%
110V AC ±10%
220V AC ±10%
Power consumption: < 5W
Output: Relay output
Frequency range: 20KHz to 170KHz (adjustable)
Reaction time: 100 ms
Sensitivity: high, medium, low (adjustable)
Loop inductance: Ideal 80µH to 300µH (include connecting wiring)
Max 50µH to 500µH (include connecting wiring)
Loop conn. Wiring: max. 100m, twisted at least 20 times per meter, total resistance <10 Ohm
Operating temp.: -30°C to +70°C
Storage temp.: -40°C to +85°C
Connection: 11-pin socket
Dimensions: 74×36×85 mm (L×W×H)
Net Weight: 270g (include socket)
