2K ACB Slow drying Car Paint Hardener , Stable luster Hardness auto body paint
Car Paint Hardener, 382 slow Drying Hardener, Hardness, the curing time is slow, paint film
Quick Detail:
|
Product Type |
382 Slow curing agent is a series of two-component isocyanate hardener, it's solid containing 40, slow curing time, paint film. While also reducing the volatile solvents meet increasingly stringent environmental regulations, to provide a more stable luster, hardness. |
|
Purpose |
With two-component paint, varnish, thinner, and promote rapid drying paint, and paint adhesion strength increases gloss paint to improve chemical stability, corrosion resistance. |
|
Substrate |
With two-component paint or varnish construction and polished, completely dry, in good condition original paint, old paint and other surface and intermediate paint, both big area painting, but also can quickly spot repair. Repair of small and medium size advantage is particularly prominent, is the preferred high-efficiency varnish coating and essential products. . |
|
Mixing Ratio |
Component paint or Clear Coat 100parts 382 Slow Drying Hardener 50parts Thinner 10-20parts |
|
Notice |
1, read the instructions before construction; 2, with the former the paint and hardener ratio adjusted as required, how much with how much Stir used within 6 hours run out; 3, the construction process to keep dry and clean, non-contact with water, acids, alcohols, bases, etc.; rear drums with paint hardener must Gaiyan avoid jelly scrapped; 4, during the construction and dry, shall not be greater than 85% relative humidity, |
|
Shelf Life |
18months if stored in its original sealed cans at 20 |
|
Packing |
1liter ,2.5liter, 4liter or 5 liter can |
Performance:
Slow-drying high-solids drying agent, suitable for high temperature under local repair and spray the whole car.
Precautions:
(1) According to the temperature, temperature and dry conditions to select different curing agents, under normal circumstances, the below 30 optional slow dry curing agent
(2) A curing agent for water are more sensitive, prone to rise after absorbing water tank and solidification phenomena, So hardener cans after use, if not yet exhausted, reclosable lid should be sealed and stored in a cool place otherwise, easy to consistency. Under normal circumstances hardener should avoid storing in direct sunlight conditions.
(3) When spraying to make appropriate personal protective treatment, such as with a gas mask, etc., as a curing agent for the respiratory system and mucous membrane irritant.
