Plastic and wood composite outdoor decking board profile extruder machine / production line
Plastic and wood composite outdoor decking board profile extruder machine / production line is one kind of WPC profiles extrusion line.
WPC profiles extrusion lines have almost the same specifications,just different moulds,also the extruder can be changed smaller.
WPC profiles has many specifications,just like the picture:
Plastic and wood composite outdoor decking board profile extruder machine / production line project evaluation:
Always,the outdoor decking board is HDPE and wood plastic composite ,the indoor decking board is the PVC and wood composite.
For outdoor WPC decking board profile , we’d like to recommend our SJZ65/132 PE and Wood Profile Extrusion Machine Line. This extrusion line is composed of SJZ65/1132 Conical Twin
screw Extruder and downstream assistant machine. Please check the below information:
Material characteristics:
Based material : HDPE 30%,Powder 60%,Chemical additives 10%
Additive : Coupling,Lubricant
Material form : All the material should be mixed completely.
Finished product : HDPE and wood profile;
Output capacity : 150200kg/hr (depending on finished product)
Basic Infrastructure (Provided by customer)
a. Space for profile extrusion line in workshop:
About 22m (length)×2.5m(width)×3m(height) (Adjustable according to your factory. We ask you to show us
the design draw of your workshop).
b. Electricity network: 380V/60Hz (Adjustable according to your local voltage standard).
c. Wire/cables: wires/cables from customer’s general control cabinet to the main control cabinet for profile
extrusion line; all electrical cable from the main control cabinet to each machine.
d. Water supply: main water pipeline supply and water pipes to machines.
e. Means for lifting the machines when unloading and positioning.
f. Everything else not clearly mentioned above.
Here is a list of the Plastic and wood composite outdoor decking board profile extruder machine / production line equipment:
1, Automatic feeder
2, SJ65/132 conical twin screw extruder
3, Mould
4, Calibration platform
5, Haul-off
6, Cutter
7, Stacker(tipping table)
Spare part
1, Mixer
2, Printer
3, Crusher
4, Mill
5, Drilling machine
6, Hot stamping machine
7, Embossing machine
8, Staning machine
Technology and Service:
1. Seller supply full set of technical document, cutter and other full document (write in English).
2. Seller supply training for buyer’s staff until buyer can produce the eligible production independently.
3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer’s factory.
4. Buyer should pay the expense for our engineers including for our engineer including round-
way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.
5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all
conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing
and testing these machines. Buyer should pay 60USD/day.
6. When installing,people of both sides cooperate well and carefully,buyer supplies convenient working
condition,any problem, should discuss peacefully and kindly.
7. Buyer supply proper working tools, equipments and other conditions.
8. The expense including the accommodation and materials of the trial-
run the machine for testing and other expenses(electric, water, air and worker) will be on seller’s account,
if the buyer or their representatives do the inspection of the machines before shipment.
9. Guarantee period: 14 months after shipment (the date of B/L)
