ABS Housing Dual Loop Detector 4 Setting with Vehicle Counting
Application:
The LD-200 Enhanced single channel detectors can be used in a variety of applications in the parking and door / gate environments:
1. To arm card readers and ticket dispensers.
2. As a barrier/gate/door closing detector.
3. As a barrier/gate/door opening detector (Free exit).
4. To generate pulses for counting vehicles.
Direction Detection:
If vehicle moves from CH1 to CH2, and left CH1, then CH1 relay pulse output; if vehicle moves from CH2 to CH1, and left CH2, then CH2 relay pulse output
Description:
The loop consists of several loops of wire and consideration
should be giving to the loop sensitivity when installing on different surfaces. Setting the correct sensitivity allows the loop to operate with maximum detection (16 levels via a trimpot). When detection occurs, the detector energises 2 relays for the output (each can be configured individually). This energising of the relay can be configured into different modes, by selecting the respective dip switch.
Sensitivity Selection
Sensitivity of the loop can be adjusted by the trimpot labeled “Sensitivity”. User can select 16 different setting by turning the trimpot with 0 being the least sensitive and “F” being the most sensitive.
Loop detectors in recent years have become a popular tool having innumerable applications in policing, right from surveillance operations to traffic control. Automation of gates and doors has become a popular usage of the loop detector.
The NBT-ILD™ vehicle loop detector is compatible with most gate operators. The ULT-MVP may be used in Center, Safety and Exit loop positions.Fifteen sensitivity settings allow for fine adjustment of the detection level.
Specifications:
|
Technical Parameter for single channel vehicle detector |
Loop Inductance |
20-2000μH(Q Factor >5) |
|
Response Times |
10-90MS |
|
|
Sensitivity |
0-7,8 levels |
|
|
Visual Indications |
Power LED-Red, Channel LED-Green |
|
|
ABS |
automatic sensitivity boost |
|
|
Direction detection |
CH1 and CH2 direction detection |
|
|
Loop frequency |
4 setting(low,Med-low,Med-Hi,High) |
|
|
Relay signal |
presence signal or pulse signal |
|
|
Housing Color |
Black,White,OEM/ODM |
|
|
Weight |
0.2KG |
|
|
Label Language |
English or OEM/ODM |
|
|
Connections |
Socket mount-11pin male(JEDEC B11-88) |
|
|
Storage Temperature |
-40 to 80 Celsius degree |
|
|
Normal Working Temperature |
-40 to 70 Celsius degree |
|
Troubleshooting
|
Symptoms |
Solution |
|
|
If the detector is not working |
Press reset |
|
|
If red led indicator is not fully lit |
Check for power supply |
|
|
|
Blinks slowly |
It maybe because the loop is short circuit or the no: of turns is not enough. |
|
Blinks faster |
It maybe because the loop is open or the no: of turns is too many. |
|
|
If no: of turns is not enough |
Lower the frequency (if the frequency is still too high, you must add more turns). |
|
|
If no: of turns is too many |
Higher the frequency (if the frequency is still too low, you must remove some turns). |
|
Application:Parking control
Ordering Information:
LD-100 single channel, boxed, 1 type 11pin connects 100-240VAC(EU standard)
LD-102 single channel, boxed, 1 type 11pin connects 12-24VADC(EU standard)
LD-105 single channel, boxed, 2 type 11pin connects 100-240VAC(USA standard)
LD-106 single channel, boxed, 2 type 11pin connects 12-24VADC(USA standard)
Tag:parking traffic detection,vehicle counting detection.
