Long Life Denso Iridium Power Ik16 Spark Plugs Part# 5303 Racing Tuned Turbo Japan Usa
Specification:
1. 100% original denso spark plug
2. Denso Iridium Power spark plug global performances.
3. 0.4mm diameter Iridium Center electrode, highest precision spark plug.
4. Denso spark plug with platinum chip on ground electrode.
5. Lifetime 100 000km (denso spark plug is 5 times of classic spark plugs use lifetime).
6. Less fuel consumption (Up to 5% less than other spark plug).
7. Denso spark plug is better acceleration / More stability from ignition.
8. More reaction from engine with denso spark plug.
9. Cleaner combustion / less unburned fuel than other spark plug.
10. Denso spark plug do better in optimized compressions.
11. Denso spark plug will slightly increase horsepower .
Description:
DENSO IK16 5303 Iridium Spark Plug is a device in the engine of a motor vehicle, which produces electric sparks to make the petrol burn. The role of the spark plug ignition coil high-voltage pulses generated by the introduction of the combustion chamber, ignition spark generated by the electrode mixture, combustion is completed.
Spark Plug Specifications
Price: The price is for the single price, MOQ is 4
Brand: DENSO
Model: IK16 5303
Suitable car: ALL Cars
Origin: Japan
Gap: 1.1mm
Product Parameters:Small head, special teething, calorific value of 6 degrees, Iridium spark plugs, screw diameter 12mm, hex size 14mm, thread standard length 26.5mm
Applicable models:
All Cars 1.8 Yaris 1.6L Corolla 1.6L Tiida, Tiida, Livina 1.6
Recommended Torque and Tightening Angle for DENSO plugs
1. Use the correct wrench for the hex on the plug, and be careful not to damage the insulator.
2. When changing, make sure that the oil, etc. on the outside of the plug does not enter the engine interior.
3. When putting the plugs in, clean the engine side of the flange, and put in the plugs after making sure the gasket is in the flange.
4. Make sure the plugs are vertical, and tighten them by hand until they cannot be tightened any further.
5. Then, use a plug wrench to tighten them accurately to the torque or rotation angle showed in the chart below.
