EMX high speed inductive loop detector traffic camera system , Road Induction Loop
Where can use our single channel vehicle detector:
Traffic Control Application
parking Vehicle Counting
parking control management system
autogate control
barrier control
Description:
Loop detectors in recent years have become a popular tool having innumerable applications in policing, right from surveillance operations to traffic control. Automation of gates and doors has become a popular usage of the loop detector.
The NBT-ILD™ vehicle loop detector is compatible with most gate operators. The ULT-MVP may be used in Center, Safety and Exit loop positions.Fifteen sensitivity settings allow for fine adjustment of the detection level.
Features
Compact Size: the compact and well engineered housing Combines all of the industry requirements regarding Features and functionality and allows this detector to be Incorporated into any or existing traffic detection system.
Diagnostic Capabilities: Comprehensive diagnostics Capabilities allow for accurate diagnosis of loop and
Installation problems.
Specifications:
|
Technical Parameter for single channel vehicle detector |
Self-turning range |
20-2000μH |
|
Response Times |
10-90MS |
|
|
Sensitivity |
0-15(Low - High) |
|
|
Visual Indications |
Power LED-Red, Channel LED-Green |
|
|
output delay |
can setting enable delay 2 seconds |
|
|
Relay time |
0,2,4,8,10,15,20,30 seconds |
|
|
Power Requirements |
12VDC or 24VDC or 110VAC or 230VAC |
|
|
relay signal |
presence and pulse |
|
|
Presence time |
NORMAL/INFINITE |
|
|
Product size |
92*76*42mm |
|
|
Label Language |
English |
|
|
Connections |
11-pin Submagnal(USA sytle and European) |
|
|
Storage Temperature |
-40 to 80 Celsius degree |
|
|
Normal Working Temperature |
-40 to 70 Celsius degree |
|
Troubleshooting
|
Symptoms |
Solution |
|
|
If the detector is not working |
Press reset |
|
|
If red led indicator is not fully lit |
Check for power supply |
|
|
|
Blinks slowly |
It maybe because the loop is short circuit or the no: of turns is not enough. |
|
Blinks faster |
It maybe because the loop is open or the no: of turns is too many. |
|
|
If no: of turns is not enough |
Lower the frequency (if the frequency is still too high, you must add more turns). |
|
|
If no: of turns is too many |
Higher the frequency (if the frequency is still too low, you must remove some turns). |
|
traffic loop vehicle detection 11-pin Submagnal wiring:
Ordering Information:
LD-100 single channel, boxed, 1 type 11pin connects 100-240VAC(EU standard)
LD-102 single channel, boxed, 1 type 11pin connects 12-24VADC(EU standard)
LD-105 single channel, boxed, 2 type 11pin connects 100-240VAC(USA standard)
LD-106 single channel, boxed, 2 type 11pin connects 12-24VADC(USA standard)
