LTE 4G Communication WLAN M2M Industrial Router with 4xLAN , 1xWAN
WLINK WL-R520LF under R520 Series Router is a range of very rugged 4G/3G routers. The competitive products are dedicated to the M2M area (communication between machines).
WLINK R520 routers are a robust solution designed to provide remote connectivity across cellular networks. Low transmission delay and very high data rates offered by existing cellular networks completely eliminate the need for expensive wired infrastructure. Installing a reliable, high performance backup solution for existing land lines or satellite networks is now a simple task thanks to modern cellular networks. Therefore, no matter if the goal is to provide primary internet access or a backup solution for an existing network, WLINK R520 router series are best solution. The optional Dual SIM card of router support increases the reliability of the router and provides a solution for those applications where failure of one mobile network must not result in system downtime. The automatic failover feature will detect the failure of the primary connection and automatically switch to an alternative connection. When connectivity over the primary connection is restored the router will switch back to the primary connection.
Basic Feature
- Industrial robust design and compact metal housing
- Ultra security, VPN: PPTP, L2TP, GPE, IPSec VPN
- High data speed 4G network, 3G and 2.5G backward compatible
- MIMO antenna for 4G to get higer speed and better performance
- Strong electromagnetic interference Resistance
- 802.11b/g/n Wi-Fi support, 150Mbps data rate
- Heat endurance and radiation ability
- Built-in watch dog, Multi-link detection
- High Reliability: Hardware l ink self-recovery
- WAN port support PPPoE, static IP, DHCP client.
- Failover or Backup between WAN and Cellular
- Always online, reboot automatically if disconnected to ensure continual connection
- Support APN and VPDN wireless private network access in
- LCP/ICMP/flow/heartbeat check, ensure network usability
- Web/CLI/SSH/Management platform support, easy configure
- SNMP network management, NTP support
- Local & remote management (configuration, status, upgrade firmware)
- Supports DHCP Server
- Supports DNS proxy and Dynamic DNS (DDNS)
- Supports timing operation
- Supports LED status indication
- Shock and vibration resistant
Advance Optional Feature
- GPS capability optional for fleet management or other tracking application
- DTU serial communication function optional
- M2M Management platform software option al available
- Optional support to control by SMS
- OpenVPN Optional
- OpenWRT Optional
- PPTP Sever optional
- Schedule reboot optional
- Customized acceptable
Specification
Specification |
||||
Supports |
4G FDD: 1800/2100/2600MHz HSPA+ 3G 850/900/1900/2100MHz |
Ethernet Standard |
IEEE 802.3 |
|
Interface |
4*LAN, 1*WAN (5xLAN optional) |
LED |
WLAN |
|
Route Protocol |
Static route |
Power Supply |
7.5 ~ 32VDC |
|
Device |
Local or remote web browser (IE v8 or above) |
WiFi |
Standard: IEEE 802.11b/g /n |
|
Firewall & Filter |
IP packet / Domain / MAC filter |
VPN(Optional) |
IPSec |
|
Power |
Idle: 80mA@+12VDC |
Other |
Dimension: 176mm x 105mm x 25mm (not including antenna) |
|
Standard |
EN 300 328 v 1.7.1 |
EN 60950-1, |
Approval |
CE |
Applications:
Data Collection and System Supervision
- Extra-high voltage equipment monitoring, Running water, gas pipe line supervision