LED DRL Lights For Brilliance V5 2012 - 2015 , Daytime Running Lights Kits For Cars
Specification:
| LED Type | Cree |
|---|---|
| Efficient Power | 11W |
| Lumen Flux | 1100LM |
| LED Color | White and yellow |
| Current | 1.0Amp 12V DC; |
| Parameter/Features |
1.IP Grade:IP-67 Warranty:1 yrs 2.Input voltage :DC12V 3.Lamp type:CREE LED from Taiwan 4.Life-span:Above 50000 hours 5.Lamp Cup Material:PMMA+ABS 6.Option beam:30°~60°(pencil~flood) 7.Color Temp:6500K-7000K |
Product Features
1. Offering a definitive leap for road traffic safety, effectively preventing accidents by 58%;
2. Drawing the driver’s attention in shorter time;
3. With LED light having longer (about 30 times) service hours than ordinary halogen lamp;
4. Less fuel consumption to save energy;
5. DRL conforms to ECE R87, but those that are of specific positions and functions should still be
subject to ECE R7 regulations;
6. Cooling fins with aluminum hulls can ensure the most proper temperatures while in operation or on
standby;
7. Protective loop with multi-functional drive can protect LED light from high voltage surges;
Installation Manual
Please carefully read these instructions before installation, as incorrect installation may damage your
car; if you are uncertain about the method of installation, please consult the dealer or professionals.
- Ensure lights, air-conditioning system and other devices are all shut off before installation, and then open the engine hood;
- Use proper tools to remove the front bumper and install the DRL to the proper position, and
- then fix the power box and the DRL properly;
- Wiring Installation (refer to Wiring Diagram)
- Check the harness of DRL control box, and then connect the yellow wire to the battery’s anode+, and connect the white wire to head lamp’s anode+, and connect the red wire to ACC terminal and the black wire to the battery’s cathode;
Notice: ACC refers to the wire in the second part of key switch which used to energize the engine, you
may find it in 3 positions:
A. One piece of ACC is in the key booster cable.
B ACC fuse can be founded in the fuse box under the wheel pillar.
C For some types of cars, ACC can be founded in the fuse box of engine chamber.
- Check the harness of DRL and then firmly connect two connectors in the harness to control box connectors. Pay attention to the direction of connectors: the harness plug at the side of lock catch should share the same direction with the control box jack.<
